Gasketing Products
| Product Name | Description | TDS |
|---|---|---|
| Loctite® 510 - Rigid Flange | Temperature Resistance up to 200°C High temperature resistant flange gasket For metal flanges. It adapts to the flange surface and fills gaps up to 0.25 mm. Increases the torque capacity of the mounted flanges. Applications: For transmission and engine sealing. It provides instant sealing at low pressure. |
Request Form |
| Loctite® 518 - Rigid Flange | Temperature Resistance up to 150°C Medium strength anaerobic flange gasket. For metal flanges. It adapts to flange surfaces and fills gaps up to 0.25 mm. Gel consistency. Ideal for overhead applications and vertical surfaces. (Does not drip) It provides instant sealing at low pressure. Applications: For sealing hard flange (eg circulation pump flanges, engine differential and timing covers) surfaces. |
Request Form |
| Loctite® 574 - Rigid Flange | Temperature Resistance 150°C It is also used for sealing rigid and rigid flanges. It cures when contact with air is cut between metal surfaces. Provides medium strength connection, easy to disassemble. It is resistant to most chemicals used in the automotive industry. Applications: Rigid and rigid flanges such as gearbox, differential. |
Request Form |
| Loctite® 598 - Black Silicone Gasket | Heat resistance -55°C + 250°C (short term) Gap up to 1mm Flexible flanges are also used to seal rough, large-cavity soft metal parts. It does not corrode. It can be used for metal, plastic and painted parts. Suitable for flanges with permanent oil contact. Applications: Valve covers, oil pan, timing cover, intake manifold, transmission oil pan. |
Request Form |
| Loctite® 5910 - Black Silicone Gasket | Heat resistance -55°C to 250°C (intermittent) Gap up to 1mm For flanges with permanent oil contact. It can be used for metal, plastic and painted parts. It has little odor and does not corrode. Typical Uses: Oil pan, valve cover, intake manifold, timing chain cover, transmission cover, differential cover, etc. |
Request Form |
| Loctite® 5699 - Gray Silicone Gasket | Heat resistance -55°C to 250°C (intermittent) Gap up to 1mm For flanges with permanent water / glycol contact. It can be used for metal, plastic and painted parts. It has little odor and does not corrode. Typical Uses: Circulation pump, thermostat, valve cover, intake manifold, transmission cover, differential cover, etc. |
Request Form |
| Loctite® 5920 - Copper Silicone Gasket | Heat resistance -55°C to 350°C (intermittent) Gap up to 1mm Flanges and high performance motors exposed to high temperatures. It can be used for metal, plastic and painted parts. It has little odor and does not corrode. Typical Uses: Turbo and exhaust systems, oil pan, valve cover, intake manifold, timing chain cover, differential cover. |
Request Form |
| Loctite® O-Ring Kiti | For instant O-Ring replacement work. It is easy to use. It's ready to use in just a few seconds. Adhesion is as strong as the rubber itself. Kit Contents: Nitrile rubber cord in 5 different sizes, dividing device, safety blade, 20 g Loctite® 406 adhesive. |
Request Form |
| Loctite® 5972 - High Temperature | Temperature Resistance - +300°C Flange Type - Rigid or Flexible Surface gasket used to reinforce solid gaskets. It is resistant to oils. APPLICATION: Cylinder head gasket, high temperature engine flanges, steam and heating lines. |
Request Form |
| Loctite® 5922 - Seal Reinforcement No.3 | Temperature Resistance up to 200°C It improves the sealing performance of old and new solid gaskets (paper, cork, felt). It is a slow curing putty. It becomes a permanent, flexible, non-hardening film. Suitable for parts that may require disassembly. APPLICATION: It can be used in engine and gearbox. It seals flanges together with old and new solid gaskets. Ideal for assembling parts after repair. |
Request Form |
| Loctite® 3450 - 2K Fast Epoxy | Mixing Ratio 1:1 by volume/weight Working time with mixture 4 min. The first hold time is 12 minutes. Temperature resistance up to +100 °C Mechanical processing can be done. It is high strength. Ideal for bonding damaged components and filling gaps. APPLICATION: Repair of holes, cracks and malfunctions in engine block and metal parts. |
Request Form |
| Loctite® 5923 | Temperature Resistance up to 200°C Used for flange sealing or reinforcement of solid gaskets. Ideal for assembling parts after repair. It is a low viscosity product. The brush is presented in the form of a box with a lid. APPLICATION: It is used in the engine and gearbox. Suitable for sealing/reinforcing flanges with old and new solid gaskets. |
Request Form |
| Loctite® 3471 - 2K Epoxy Steel Metal Set | Mixing Ratio 1:1 by volume/weight Working time with the mixture is 45 min. The first hold time is 180 min. Temperature resistance up to +120°C. Mechanical processing can be done. Suitable for repairing and rebuilding worn metal parts. APPLICATION: Worn and cracked engine block, pipe, etc. Repair of all kinds of steel parts and components. |
Request Form |
| Loctite® 3475 2K Epoksi Alüminyum Metal Set | Mixing Ratio 1:1 by volume/weight Working time with the mixture is 45 min. The first hold time is 180 min. Temperature resistance up to +120°C Mechanical processing can be done. Suitable for repairing and rebuilding worn metal parts. APPLICATION: Worn and cracked engine block, pipe, etc. Repair of all kinds of steel parts and components. |
Request Form |
| LOCTITE 518 | LOCTITE 518 is a medium strength, general purpose gasket sealant with excellent contamination tolerance. Ideal for use on cast iron, steel and aluminum flanges. | Request Form |