Loctite Automotive Products
Flange Sealing
Product Name Description TDS
LOCTITE 5188 High elasticity anaerobic surface seal product. Request Form
LOCTITE 573 Medium strength, anaerobic surface sealant product. Request Form
Release Agent
Product Name Description TDS
LOCTITE FREKOTE R110 LOCTITE® FREKOTE R110 is a water-based release agent for rubber molding. This spray-on product is chemically bonded to the mold surface, forming a thin, chemically resistant coating capable of separating all natural and synthetic polymers (except silicone elastomers) and thermoplastic urethanes. It hardens quickly, creates minimal deposits on the mold surface and does not transfer to the molded part. Request Form
LOCTITE FREKOTE R150 LOCTITE® FREKOTE R150 is a water-based mold release emulsion that separates standard rubber and rubber-metal parts. It provides low slip and low mold accumulation. The material, which can be applied quickly and easily with a spray gun, gives a matte finish. It is an ideal water-based release emulsion for reducing components. Request Form
LOCTITE FREKOTE R180 LOCTITE® FREKOTE R180 is the ideal water-based release emulsion for rubbers with high slip properties, difficult to separate, and especially for highly abrasive components. Request Form
LOCTITE FREKOTE R220 LOCTITE® FREKOTE R220 is a water-based mold release emulsion whose high shear properties make it ideal for hard-to-release rubbers such as EPDM and highly filled elastomers. Request Form
FREKOTE® 44-NC™ Request Form
FREKOTE® 55-NC Request Form
FREKOTE® 700-NC Request Form
FREKOTE® 710-LV Request Form
FREKOTE® 720-NC Request Form
FREKOTE® AQUALINE® C-600™ Request Form
FREKOTE® AQUALINE® C-200 Request Form
FREKOTE® EXITT Request Form
FREKOTE® FREWAX® Request Form
FREKOTE® WOLO Request Form
FREKOTE® SOLO Request Form
FREKOTE® FRP-NC Request Form
FREKOTE® WOLO Request Form
FREKOTE® WOLO-HL Request Form
FREKOTE® 44-NC Request Form
FREKOTE® 55-NC Request Form
FREKOTE® AQUALINE® ROTOLEASE® Request Form
FREKOTE® S-50 Request Form
FREKOTE® 800-NC Request Form
FREKOTE® AQUALINE® R-95 Request Form
FREKOTE® HMT™ or HMT-2 Request Form
FREKOTE® 1450™ Request Form
FREKOTE® 1450-HS™ Request Form
FREKOTE® 1711 Request Form
FREKOTE® AC-4368 Request Form
FREKOTE® LIFFT Request Form
FREKOTE® RIMLEASE® 8™ Request Form
FREKOTE® REL-EAZE™ Request Form
FREKOTE® RC-321 Request Form
FREKOTE® EFR™ Request Form
FREKOTE® CUR™ Request Form
FREKOTE® PUR-100™ Request Form
FREKOTE® PU7000 Request Form
FREKOTE® PU7001™ Request Form
FREKOTE® PU7200™ Request Form
FREKOTE® 915WB™ Request Form
FREKOTE® CMR™ Request Form
FREKOTE® AQUALINE® RS-100™ Request Form
FREKOTE® FMS-100™ Request Form
FREKOTE® CS-122™ Request Form
FREKOTE® CS-123™ Request Form
Gres
Product Name Description TDS
LOCTITE GRES 8023/453 LOCTITE® LB 8023 is a black, metal-free, over-brush lubricant and lubricant made from graphite, calcium, boron nitride and rust inhibitors. ABS approved, protects assemblies from fresh and salt water. Request Form
LOCTITE LB 8102 High performance mineral grease. Request Form
LOCTITE LB 8103 General mineral grease with MOS2. Request Form
LOCTITE LB 8104 Wide temperature range silicone grease. NSF food approval available. Request Form
LOCTITE LB 8105 Food approved mineral grease with temperature resistance up to 150°C. Request Form
LOCTITE LB 8109 Liquid grease, spray. Request Form
Silicone Gaskets
Product Name Description TDS
LOCTITE GASKET MAKER Silicone sealant - Red
Silicone sealant - Black
Silicone sealant - Gray		 Request Form
LOCTITE SI 5130 Silicone gasket - white, 250°C temperature resistant. Request Form
LOCTITE SI 5366 Silicone seal transparent, 250°C temperature resistance. Request Form
LOCTITE SI 5368 Silicone gasket black, 250°C temperature resistant. Request Form
LOCTITE SI 5398 Silicone seal red, temperature resistant up to 350°C. Request Form
LOCTITE SI 5300 Silicone gasket red, temperature resistant up to 350°C, pasty. Request Form
LOCTITE SI 5610 A&B 2-component silicone, 5 min drying time, use with air gun, black. Request Form
LOCTITE SI 5615 A&B 2-component silicone, 12 min drying time, use with air gun, black. Request Form
LOCTITE SI 5616 A&B 2-component silicone, 13 minutes drying time, use with air gun, white. Request Form
LOCTITE SI 5699 Super gray, non-corrosive, resistant to 250°C. Request Form
LOCTITE SI 5900 Silicone gasket, black, resistant to 250°C, excellent oil resistance. Request Form
LOCTITE SI 5910 Silicone gasket black, pressure tube resistant to 250°C. Request Form
LOCTITE SI 5920 Super copper, non-corrosive, 350°C for high temperature. Request Form
LOCTITE SI 5921 Gasket, for reinforcement to solid gaskets, fast drying. Request Form
LOCTITE SI 5922 The gasket dries slowly, remains elastic, to reinforce solid gaskets. Request Form
LOCTITE SI 595 Silicone gasket transparent, 250C temperature resistance. Request Form
LOCTITE SI 5970 Flange sealing is ideal for large gaps. Request Form
LOCTITE SI 598 Super black, non-corrosive, resistant to 250°C. It is OEM approved. Request Form
Assembly Pastes
Product Name Description TDS
LOCTITE LB 8008 C5-A copper mounting paste, brush cap, military approved. Request Form
LOCTITE LB 8009 Metal-free assembly paste for heavy-duty use - packaging with a brush lid. Request Form
LOCTITE LB 8023 Marine assembly paste suitable for high humidity environments. Request Form
LOCTITE LB 8150 Aluminum mounting paste. Request Form
LOCTITE LB 8151 Aluminum mounting paste, spray. Request Form
LOCTITE LB 8156 Metal-free assembly paste. Request Form
Activators and Primers
Product Name Description TDS
LOCTITE SF 734 Activator (for LOCTITE AA 317). Request Form
LOCTITE SF 770 Primer (for LOCTITE 406 and LOCTITE 4062). Request Form
LOCTITE SF 7386 Multibond - activator (for acrylic products). Request Form
LOCTITE SF 7455 Activator for instant adhesives. Request Form
LOCTITE SF 7649 Activator for anaerobic products, application by spray. Request Form
LOCTITE SF 7649 Activator for anaerobic products, cap with brush. Request Form
Special Purpose Products
Product Name Description TDS
LOCTITE AA 3035 Ideal for hard-to-stick surfaces such as PP / PE when you need an additional primer application. Request Form
LOCTITE SF 7414 Request Form
LOCTITE SF 7900 Ceramic protective coating spray for welding work. Request Form
LOCTITE SI 5075 Silicone sealing and insulating tape, red, resistant up to -54 + 260 degrees. Request Form
TEROSON MS 9220 Request Form
TEROSON VR 5000 Spray contact adhesive. Request Form
TEROSON PU 6700 2 Component Polyurethane based adhesive. Request Form
TEROSON PU 6700 GUN TEROSON PU 6700 application gun. Request Form
TEROSON SF 7500 Converts existing rust into a stable layer. The cured product acts as a ready-to-paint primer. Protects surfaces against corrosion. Metal pipes, valves, storage tanks, conveyors and agricultural equipment etc. can also be used. Request Form
TEROSON ET QUAD ST MIX SMALL Static mixer 50 ml. Request Form
Application Bits Set
Product Name Description TDS
LOCTITE 97222 Polyethylene, conical application tip. 18 Caliber. Green; 1 1/4 inches long. Suitable for anaerobic products and instant adhesives. Request Form
LOCTITE 97223 Polyethylene, conical application tip. 20 Caliber. Pink; 1 1/4 inches long. Suitable for anaerobic products and instant adhesives. Request Form
LOCTITE 97225 Stainless steel, flat application tip. 15 Caliber. Amber; 1 1/4 inches long. Suitable for instant adhesives. Request Form
LOCTITE 97226 Stainless steel, flat application tip. 18 Caliber. Amber; 1 1/4 inches long. Suitable for instant adhesives. Request Form
LOCTITE 97227 Stainless steel, flat application tip. 20 Caliber. Pink ; 1 1/4 inches long. Suitable for instant adhesives. Request Form
LOCTITE 97229 Polypropylene, flexible application tip. 15 Caliber. Amber is 1 1/4 inches long. Suitable for anaerobic products and instant adhesives. Request Form
Hybrid Adhesives
Product Name Description TDS
LOCTITE HY 4060 GY Durable, 5 Minute Repair Adhesive. It is gray in color. Durable on a variety of surfaces, fast-curing for multi-purpose repairs. It exhibits significant advantages in terms of multiple substrate bonds and improved durability at elevated temperatures. Request Form
LOCTITE HY 4070 Ultra-Fast, Multi-Purpose Repair Adhesive. It has very good multi-substrate bonding ability (metal, plastic, rubber, wood, composite, etc.) It has gap-filling properties up to 5 mm. There are 4 tips in the box of the product. Request Form
LOCTITE HY 4080 GY Robust and Multi-Purpose Structural Adhesive. It is gray in color. It has a quick fix feature that reduces assembly time. It shows high performance especially in large gaps. Request Form
LOCTITE 4090 Structural hybrid adhesive. It is transparent in color. It is an innovative hybrid technology that combines the adhesion strength and speed needed to solve design and assembly problems. It has gap filling feature up to 5 mm and heat resistance up to 150°C. Request Form
LOCTITE HY 4090 GY Structural hybrid adhesive. It is gray in color. It is an innovative hybrid technology that combines the adhesion strength and speed needed to solve design and assembly problems. It has gap filling feature up to 5 mm and heat resistance up to 150°C. Request Form
Mixer Tip
Product Name Description TDS
LOCTITE 4070 (UÇ) Extra tip for LOCTITE 4070, pack of 5. Request Form
LOCTITE 4080 ve 4090 (UÇ) Extra tip for LOCTITE 4080 and 4090, pack of 10. Request Form
Thread Sealants
Product Name Description TDS
Loctite® 243 Medium Strength Recommended by automotive OEMs.
It fixes and seals bolts, nuts and studs to prevent loosening due to vibration.
Allows disassembly with standard tools.
Effective on all kinds of metal threaded connections.
Applications:
Flywheel bolts, bevel gear, bolts, crankshaft nuts and threaded connections in covers, oil drain plug.
Up to Thread Size M 36.
Temperature Resistance +150 °C		 Request Form
Loctite® 270 High Strength For maximum fastening strength on bolts, nuts and studs
For permanent fixation on assemblies that must not come loose
Sealing of connections
Can be disassembled by heating to 300 °C
Applications:
Gears in gearboxes, cylinder blocks, etc. fixing.
Green / Red - liquid
Thread Size up to M 30
Temperature Resistance +150°C		 Request Form
Loctite® 2701 High Strength OEM For maximum fastening strength on bolts, nuts and studs
For permanent fixation on assemblies that must not come loose
Sealing of connections
It can be disassembled by heating to 300°C.
Applications:
Gears in gearboxes, cylinder blocks, etc. fastening, fixing studs in gearboxes and cylinder blocks.		 Request Form
Loctite® 2400 Medium Strength No danger icons, no risk and safety warnings
"White" Material Safety Data Sheet – (EC) No. 1907/2006 – According to ISO 11014-1, no warning in Sections 2, 3, 15 and 16 of the Material Safety Data Sheet
Excellent chemical and thermal resistance in cured product
Applications:
For connections that need service and need to be regularly disassembled with hand tools - machine tools and presses, pumps and compressors, mounting bolts, gearboxes		 Request Form
Loctite® 2700 High Strength No danger icons, no risk and safety warnings
"White" Material Safety Data Sheet – (EC) No. 1907/2006 – According to ISO 11014-1, no warning in Sections 2, 3, 15 and 16 of the Material Safety Data Sheet
Excellent chemical and thermal resistance in cured product
Applications:
For connections that do not need to be disassembled - flywheel bolts, bolts in gearbox, differential, bearings, crankshaft.		 Request Form
LOCTITE 242 LOCTITE® 242 is a medium strength, medium viscosity, methacrylate based, general purpose quality threadlocker. The product provides fast bonding times of 5, 15 and 20 minutes on steel, brass and stainless steel respectively. Request Form
LOCTITE 243 LOCTITE® 243 is a general purpose threadlocker that provides a medium strength fixation. LOCTITE 243 is effective on all metals, including passive surfaces such as stainless steel, aluminum and coated surfaces. Request Form
LOCTITE 262 LOCTITE® 262 is a red colored general purpose medium to high strength thixotropic methacrylate based adhesive. Steel bonding time is 15 minutes, brass 8 minutes and stainless steel 180 minutes. Request Form
LOCTITE 270 LOCTITE® 270 is a high strength threadlocker for maximum effectiveness in sealing bolts, nuts and studs to prevent loosening due to vibration. Request Form
LOCTITE 2700 Request Form
LOCTITE 2701 High-strength, low-viscosity, green-colored, methacrylate-based, quick-release adhesive that emits fluorescent light to allow viewing under UV light. Request Form
LOCTITE 275 The product cures in the absence of air between adjacent metal surfaces and prevents loosening and leakage caused by shock and vibration. Typical applications include locking and sealing large bolts and studs. Request Form
LOCTITE 290 LOCTITE® 290 is a liquid medium/high strength threadlocker for locking and sealing threaded fasteners. Due to its low viscosity and capillary effect, the product penetrates the threaded connections, eliminating the need for disassembly before application. Request Form
LOCTITE 8008-C5-A COPPER MOUNT LOCTITE® LB 8008 C5-A is placed in a box with a brushed lid, with the assembly paste containing copper and graphite suspended in high-quality grease. Applications include screws, nuts, pipes, exhaust bolts and brake caliper bolts. Request Form
LOCTITE DRI 2045B LOCTITE® EA 2045 KIT20LBEN is a high strength, high cure bond, fast cure, pre-applied screw locking adhesive with temperature performance up to 400°F. Provides excellent resistance to vibration loosening in any threaded fastener. Designed for coated and stainless steel fasteners. Request Form
LOCTITE DRI 2045C LOCTITE® DRI 2045™ is a medium to high strength pre-applied screw fastener with good substrate compatibility, specifically designed to meet automotive specification requirements. Request Form
LOCTITE DRI 5061 LOCTITE® DRI 5061 is a pre-applied, non-curing, non-toxic, water-based thread sealant with high temperature and solvent resistance. The coating is dry to the touch and ready for immediate use. Request Form
LOCTITE 222 Low strength, easily disassembled with hand tools. Request Form
LOCTITE 276 High strength, not disassembled. It dries fast, can be used on passive surfaces. Request Form
Pipe Sealant
Product Name Description TDS
Loctite® 577 Medium Strength General purpose liquid thread sealant for metal threads.
Only suitable for metal gears.
Provides instant low pressure sealing.
Resistant to fuel, oil, coolants and hydraulic fluids.
It fixes the connection against loosening caused by vibration.
Applications:
Ideal for hydraulic and pneumatic circuits. It is used in place of flax, pastes and PTFE tapes.		 Request Form
Loctite® 641 Medium Strength The gap in the pipe is up to 0.25 mm.
It is used to fix the bearings on the shaft or in its seat.
It allows the parts to be disassembled later.
Applications:
Fixing all kinds of bearings and bushings		 Request Form
Loctite® 648 High Strength Thread up to 0.15 mm
For high strength assemblies.
Fills gaps in repaired parts.
It seals the connections and prevents corrosion due to friction.
It is difficult to disassemble with standard tools.
Applications:
Tight fit of splined shafts, bearings, steering system elements, shift gears and all cylindrical parts (eg liners, bushings and inserts).		 Request Form
Loctite® 638 High Strength Backlash in diameter up to 0.25 mm
When it is trapped between metal surfaces and its contact with air is cut off, it starts to cure and provides very high strength adhesion.
It is used in cylindrical tight fit applications.
Applications:
Fixing bushings and sleeves to their bearings or shaft.		 Request Form
Loctite® 660 High Strength OEM Silver – paste, Diameter up to 0.5 mm (with activator).
For easy repair of worn shafts, bushings and bearings.
Prevents corrosion of joined surfaces.
It is particularly suitable for filling large gaps.
Ideal for repairing worn parallel wedges, splines and tapers.
Applications:
Filling gaps between worn metal parts such as shafts, housings, bearings, bushing, drive assemblies (e.g. camshaft, clutch, flywheel and crankshafts).		 Request Form
LOCTITE 121078 LOCTITE® 121078, with its high viscosity, max. It is a green colored tight fit component that is a good option where the diameter opening is 0.25 mm. It is a high strength product for applications requiring permanent adhesion and good heat resistance. Request Form
LOCTITE 510 LOCTITE® 510 is a high temperature resistant anaerobic sealant that hardens in the absence of air between tightly fitting metal surfaces. Typical applications include sealing rigid flange surfaces in transmission and engine housings. Request Form
LOCTITE 542 LOCTITE® 542 is designed to lock and seal metal pipes and fittings, as well as other cylindrical metal assemblies. Request Form
LOCTITE 572 TTL LOCTITE® 572 is a white to off-white, medium strength, methacrylate-based, threaded sealant for metal pipes and fittings. Suitable for coarse gears, it provides a breaking torque of 7 Nm. Request Form
LOCTITE 577 LOCTITE® 577 is designed to lock and seal metal pipes and fittings, as well as other threaded assemblies. The product provides fast, low pressure sealing on metal pipes and fittings. Does not slip, shrink or shrink. Request Form
LOCTITE 603 LOCTITE ® 603 is a high strength shrink fit compound. It is designed for bonding cylindrical fittings, especially for sintered bearings and where permanently clean surfaces cannot be assured. Request Form
LOCTITE 620 LOCTITE ® 620 is a snap-in compound designed for bonding cylindrical assemblies. The product can be cured without air between tight metal surfaces and prevents loosening and leaks due to shock and vibration. Request Form
LOCTITE 638 LOCTITE® 638 is designed for bonding cylindrical parts, especially where bonding gaps can approach 0.25 mm. The product cures when there is no air between tightly fitting metal surfaces, preventing loosening and leaks due to shock and vibration. Request Form
LOCTITE 641 LOCTITE® 641 is designed for bonding cylindrical fasteners, especially if disassembly is required for maintenance operations. When the product is left without air between tight-fitting metal surfaces, it cures and prevents loosening and leaks due to shock and vibration. Request Form
LOCTITE 648 LOCTITE® 648 is a green, fluorescent, low viscosity, high strength, urethane methacrylate acrylic anaerobic sealant designed for bonding cylindrical assemblies. Request Form
LOCTITE 55 Silicone impregnated sealing thread. Provides instant full pressure sealing without curing. Suitable for drinking water and natural gas connections. It has DVGW, WRC, BS 6920 KTW and GAZMER approvals. Request Form
LOCTITE SI 5331 PVC etc. Suitable for plastic gears. Request Form
LOCTITE 601 Suitable for high-strength press-fit products. Request Form
LOCTITE 97009 Integrated semi-automatic application systems. Request Form
LOCTITE 97121 Pinch valve applicator - perfectly compatible with all LOCTITE products, including cyanoacrylates. Request Form
TEROSON ET AIR GUN Application gun for sausage packaging. Request Form
PRO PUMP HAND HELD DISPENSER Request Form
Gasketing Products
Product Name Description TDS
Loctite® 510 - Rigid Flange Temperature Resistance up to 200°C
High temperature resistant flange gasket
For metal flanges.
It adapts to the flange surface and fills gaps up to 0.25 mm.
Increases the torque capacity of the mounted flanges.
Applications:
For transmission and engine sealing. It provides instant sealing at low pressure.		 Request Form
Loctite® 518 - Rigid Flange Temperature Resistance up to 150°C
Medium strength anaerobic flange gasket.
For metal flanges.
It adapts to flange surfaces and fills gaps up to 0.25 mm.
Gel consistency.
Ideal for overhead applications and vertical surfaces. (Does not drip)
It provides instant sealing at low pressure.
Applications:
For sealing hard flange (eg circulation pump flanges, engine differential and timing covers) surfaces.		 Request Form
Loctite® 574 - Rigid Flange Temperature Resistance 150°C
It is also used for sealing rigid and rigid flanges.
It cures when contact with air is cut between metal surfaces.
Provides medium strength connection, easy to disassemble.
It is resistant to most chemicals used in the automotive industry.
Applications:
Rigid and rigid flanges such as gearbox, differential.		 Request Form
Loctite® 598 - Black Silicone Gasket Heat resistance -55°C + 250°C (short term)
Gap up to 1mm
Flexible flanges are also used to seal rough, large-cavity soft metal parts.
It does not corrode.
It can be used for metal, plastic and painted parts.
Suitable for flanges with permanent oil contact.
Applications:
Valve covers, oil pan, timing cover, intake manifold, transmission oil pan.		 Request Form
Loctite® 5910 - Black Silicone Gasket Heat resistance -55°C to 250°C (intermittent)
Gap up to 1mm
For flanges with permanent oil contact.
It can be used for metal, plastic and painted parts.
It has little odor and does not corrode.
Typical Uses:
Oil pan, valve cover, intake manifold, timing chain cover, transmission cover, differential cover, etc.		 Request Form
Loctite® 5699 - Gray Silicone Gasket Heat resistance -55°C to 250°C (intermittent)
Gap up to 1mm
For flanges with permanent water / glycol contact.
It can be used for metal, plastic and painted parts.
It has little odor and does not corrode.
Typical Uses:
Circulation pump, thermostat, valve cover, intake manifold, transmission cover, differential cover, etc.		 Request Form
Loctite® 5920 - Copper Silicone Gasket Heat resistance -55°C to 350°C (intermittent)
Gap up to 1mm
Flanges and high performance motors exposed to high temperatures.
It can be used for metal, plastic and painted parts.
It has little odor and does not corrode.
Typical Uses:
Turbo and exhaust systems, oil pan, valve cover, intake manifold, timing chain cover, differential cover.		 Request Form
Loctite® O-Ring Kiti For instant O-Ring replacement work.
It is easy to use.
It's ready to use in just a few seconds.
Adhesion is as strong as the rubber itself.
Kit Contents:
Nitrile rubber cord in 5 different sizes, dividing device, safety blade, 20 g Loctite® 406 adhesive.		 Request Form
Loctite® 5972 - High Temperature Temperature Resistance - +300°C
Flange Type - Rigid or Flexible
Surface gasket used to reinforce solid gaskets.
It is resistant to oils.
APPLICATION:
Cylinder head gasket, high temperature engine flanges, steam and heating lines.		 Request Form
Loctite® 5922 - Seal Reinforcement No.3 Temperature Resistance up to 200°C
It improves the sealing performance of old and new solid gaskets (paper, cork, felt).
It is a slow curing putty.
It becomes a permanent, flexible, non-hardening film.
Suitable for parts that may require disassembly.
APPLICATION:
It can be used in engine and gearbox. It seals flanges together with old and new solid gaskets. Ideal for assembling parts after repair.		 Request Form
Loctite® 3450 - 2K Fast Epoxy Mixing Ratio 1:1 by volume/weight
Working time with mixture 4 min.
The first hold time is 12 minutes.
Temperature resistance up to +100 °C
Mechanical processing can be done.
It is high strength.
Ideal for bonding damaged components and filling gaps.
APPLICATION:
Repair of holes, cracks and malfunctions in engine block and metal parts.		 Request Form
Loctite® 5923 Temperature Resistance up to 200°C
Used for flange sealing or reinforcement of solid gaskets.
Ideal for assembling parts after repair.
It is a low viscosity product.
The brush is presented in the form of a box with a lid.
APPLICATION:
It is used in the engine and gearbox. Suitable for sealing/reinforcing flanges with old and new solid gaskets.		 Request Form
Loctite® 3471 - 2K Epoxy Steel Metal Set Mixing Ratio 1:1 by volume/weight
Working time with the mixture is 45 min.
The first hold time is 180 min.
Temperature resistance up to +120°C.
Mechanical processing can be done.
Suitable for repairing and rebuilding worn metal parts.
APPLICATION:
Worn and cracked engine block, pipe, etc. Repair of all kinds of steel parts and components.		 Request Form
Loctite® 3475 2K Epoksi Alüminyum Metal Set Mixing Ratio 1:1 by volume/weight
Working time with the mixture is 45 min.
The first hold time is 180 min.
Temperature resistance up to +120°C
Mechanical processing can be done.
Suitable for repairing and rebuilding worn metal parts.
APPLICATION:
Worn and cracked engine block, pipe, etc. Repair of all kinds of steel parts and components.		 Request Form
LOCTITE 518 LOCTITE 518 is a medium strength, general purpose gasket sealant with excellent contamination tolerance. Ideal for use on cast iron, steel and aluminum flanges. Request Form
Cleaning
Product Name Description TDS
Brake, Pad, Coupling Cleaner Cleans and removes oil from brake, clutch and transmission parts.
It is fast and effective.
Removes adhesive and sealant residues.
It leaves no residue.
Applications:
It is applied to remove oil, adhesive and sealant residues on brake, clutch and transmission flanges and from the engine and carburetor, and hardened lubricants from hinges and connections.		 Request Form
Loctite® 7063 - Cleaner and Degreaser Loctite is a general purpose product used for cleaning surfaces and removing oil prior to adhesive product applications.
It evaporates quickly.
It leaves no residue.
Applications:
Removes all kinds of oil, grease and dirt. Ideal for use before bonding and sealing applications.		 Request Form
Loctite® 7840 - Water Based Cleaner and Degreaser Multi-purpose cleaner and degreaser.
It can be diluted with water from 1:4 to 1:288. (Application dependent)
It can be applied using high pressure cleaning machines.
It is biodegradable.
Applications:
Used for cleaning parts, engine cleaning, workshop floor and walls before repair work.		 Request Form
Loctite® 7200 Seal Remover Removes dried gaskets and sealing residues, dried oil, tar, carbon deposits and paints.
Easy removal prevents damage to parts.
Softens cured sealants and gasket residues in 10-15 minutes.
It reduces the need for sanding.
Applications:
Engine, transmission, carburetor, circulation and fuel pumps, rear axle, etc. Recommended for metal sealing faces on		 Request Form
Loctite® 7100 - Leak Detector Especially in gas or pneumatic installations, it provides easy detection of suspected leaks other than pure oxygen.
It is a liquid-based product and starts to form bubbles where there is a leak.
Applications:
Pipe connection, leak detection, tightness check after repair.		 Request Form
Loctite® 7039 - Contact Cleaner It is used for cleaning electrical connections.
Does not affect insulating varnishes.
Removes moisture or other contamination.
Does not contain silicone.
Applications:
For cleaning connections, relays, fuses and terminals.		 Request Form
Loctite® 7010 - Multi-Purpose Workshop Cleaner Multi-purpose liquid cleaner for industrial machine and workshop cleaning.
For general cleaning of light dirt.
It's fragrant.
It is biodegradable, does not contain solvents, does not carry a safety warning.
Applications:
Apply sufficient amount of material on the surface to be cleaned. Spread the products on the surface by pressing - rubbing.		 Request Form
Loctite® 7012 - Immersion Cleaning General purpose cleaner and degreaser for heavy soiling.
For pressure or non-pressure cleaning of all mechanical parts.
It is also suitable for synthetic surfaces, rubber and painted surfaces.
Excellent penetration on dirty surface and easy removal of grease.
It can be applied by manual, spray and dipping methods.
Does not contain solvent.
Applications:
It can be applied at room temperature with a cloth or brush, in the form of spray or by foaming machine or dipping method.

Concentration:
Manual (2-10%), brush (2-5%), high-pressure equipment (1-2% at the nozzle), foam machine (20-50%), in the immersion tank (10-20%), in the washing table (10-30%).		 Request Form
Loctite® 7013 - Industrial Cleaner Water-soluble cleaner for mechanical parts and cleaning tables. Excellent penetration and dissolution of all types of contamination. Provides temporary rust protection. Low dermatological risk. Does not contain solvent. Applications: Loctite® 7013 is used undiluted. Apply sufficient amount of product using a brush or hand shower. Request Form
Loctite® 7023 - Gas Butterfly Cleaner It quickly dissolves resin, oil and varnish residues. Solvent Based. Request Form
Loctite® 7018 - High Pressure Cleaner Effective tough dirt cleaner for mechanical parts.
Suitable for high pressure applications.
Good foaming properties and temporary corrosion protection.
Removal of dirt, oil and grease from washable surfaces.
Solvent free, biodegradable.
Applications:
It can be applied with spray equipment or foaming machine.

Study Concentrations:
High Pressure Applications: 0.5-2%.
Manual or Foam Cleaning: 20-50%.		 Request Form
Loctite® 7860 - Low Foaming Floor Cleaner Neutral, low foaming, perfumed floor cleaner for daily cleaning of sensitive floors.
Protective and dirt-repellent properties.
Ideal for use in floor cleaning equipment.
It can also be used in manual applications. Solvent-free.
Applications:
When Loctite® 7860 is applied at the recommended working concentration, it removes heavy oil, dirt and other residues. On heavily soiled floors: 10% solution.

On Medium Soiled Floors: 5% solution.
Manual Wiping: 2.5% solution.		 Request Form
Loctite® 7862 - Graffiti and Text Remover The mild thixotropic product has been developed to remove graffiti and writing from smooth and non-absorbent surfaces.
Very effective on almost any type of graffiti.
Especially effective on spray paints containing bitumen.
It can be used on vertical surfaces.
It does not contain a security warning.
Applications:
It can be used manually (with a brush or sponge) or with the airless spray system. After 5-10 minutes of application, dissolved paint residues should be removed from the surface manually.
Rinsing with Loctite® 7012 should be done to completely clean the surface. (Usage Concentration: 3-5% aqueous solution) If there is still strong dirt on the surface, repeat the application.		 Request Form
LOCTITE 194500 LOCTITE® SF 194500 is a green, thin, solvent-free, reactive methacrylate monomer-based, liquid organocopper primer compound for use with LOCTITE anaerobic adhesives and sealants where difficult-to-bond applications such as galvanized steel or zinc electroplated surfaces. Request Form
LOCTITE DRI MICROCAPS P2 Small microcapsules are perfect for fasteners of all sizes, especially fine threads. Request Form
LOCTITE FREKOTE PMC LOCTITE® FREKOTE PMC is a post cleaner with a special solvent blend designed to dissolve and remove wax from polyester molds without matting the surface. It can be used for cleaning brushes and equipment as well as epoxy and metal mold surfaces. Request Form
LOCTITE SF 7023 Carburetor cleaner. Request Form
LOCTITE SF 7039 Contact cleaning spray. Request Form
LOCTITE SF 7061 The surface cleaner is only suitable for metals. Request Form
LOCTITE SF 7063 Surface cleaner, general purpose. Request Form
LOCTITE SF 7100 Detection spray for compressed gas and compressed air leaks. Request Form
LOCTITE SF 7200 Seal remover spray. (Solvent based) Request Form
LOCTITE SF 7800 Anti-corrosion zinc spray. Request Form
LOCTITE SF 7803 Anti-corrosion wet film. Request Form
LOCTITE SF 7840 Water-based degreaser surface cleaner. Request Form
LOCTITE SF 7855 
Hand Cleaner.
 Request Form
LOCTITE LB 8005 Belt care spray. Request Form
TEROSON VR 190 Brake pad cleaner. Request Form
TEROSON VR 620 Rubber care spray. Request Form
LOCTITE SF 7850 Natural hand cleaner with pumice stone. Request Form
Lubrication
Product Name Description TDS
Loctite® Multi - Spray - Multi-Purpose Lubricant Multipurpose product. It stops the squeaking of moving parts. Protects against abrasion. It protects ignition systems from moisture and helps engines start immediately. Cleans and protects metals. Applications: It facilitates the removal of welded or corroded parts (eg bolts, nuts, hinges). Request Form
Teroson Rust Remover Multipurpose rust remover.
Colorless mineral oil.
It penetrates instantly.
Disassembled parts remain lubricated and protected against wear.
Applications:
Facilitates removal of rusted and welded bolts, screw connections and common metal elements.		 Request Form
Loctite® 8040 - Silicone Lubricant
Transparent lubricant for plastic-plastic and plastic-metal lubrication. Protects, maintains and lubricates plastic and metal parts. It does not attract dust or dirt. Typical Uses: Lubrication of slides, vehicle door locks and plastic elements.		 Request Form
Loctite® 8101 - Chain Lubricant Non-bounce adhesive chain netting.
Protects against water ingress.
It provides excellent resistance to wear and high pressure.
Typical Uses:
It is used in open mechanisms such as chains and cogs.		 Request Form
Loctite® 8005 - Belt Spray It prevents slipping. Increases friction for all types of belts. Extends belt life. Request Form
Loctite® 8008 - Copper Assembly Paste Special C5-A® copper-based mounting paste. Protects metal parts against rust, corrosion and boiling. It is resistant up to 980°C. Applications: Exhaust bolts, brake caliper bolts. Request Form
Teroson Liquid Grease Teroson Liquid Grease Long Life, Adhesion
Specialty Lubricant
Excellent lubricating and anti-corrosion, adhesive liquid grease.
Lubricates mechanisms and moving parts operating under high pressure and load.
It does not bleed.
It is water resistant.
Applications:
Permanent lubrication of parts such as gears, bearings, chains, door hinges, rails, steering arm heads.		 Request Form
Teroson Rubber Tire Care Spray It is used in the cleaning and maintenance of all rubber parts in automobiles.
It prevents the hardening of the rubber and refreshes the colors.
Does not contain silicone, does not damage painted or chrome surfaces.
Applications:
Renewal and maintenance of door-window seals, plastic vinyl outer moldings, bumpers and all types of tires and rubber parts in vehicles.		 Request Form
Plastilube - Synthetic Grease Plastilube High Quality Grease
Suitable for ABS.
It is not conductive.
It does not leak and is water resistant.
Provides easy assembly and disassembly, prevents corrosion.
Does not contain copper.
It does not contain acid.
Applications:
It is used against squeaking that may occur in drum and disc brakes, seat rails, door mechanisms.		 Request Form
Loctite 8009 Heavy Duty LOCTITE® LB 8009 is a metal-free lubricating oil in brush tip form with graphite and calcium fluoride. It provides excellent lubrication performance for all types of metals, including stainless steel, aluminum and soft metals. Request Form
Loctite 8009 Heavy Duty LOCTITE® LB 8009 is a metal-free lubricating oil in brush tip form with graphite and calcium fluoride. It provides excellent lubrication performance for all types of metals, including stainless steel, aluminum and soft metals. Request Form
Loctite LB 8011 Synthetic chain lubricant with high temperature resistance. 250°C temperature resistance. Request Form
Loctite LB 8021 Silicone spray. Request Form
Loctite LB 8030 Cutting oil. Request Form
Loctite LB 8031 Spray cutting oil. Request Form
Loctite LB 8040 Freeze and loosen rust remover spray. Request Form
Loctite LB 8101 Chain lubricant, water resistant, non-slip. Request Form
Loctite LB 8191 Spray anti-friction dry lubricant with MOS2. Request Form
Loctite LB 8192 Spray dry lubricant with PTFE. Request Form
Loctite LB 8201 Multifunctional lubricant. It forms a non-drying wet oily film, provides easy removal of stuck parts. Request Form
Glass Bonding
Product Name Description TDS
Terostat 8596 - Standard Glass Adhesive It has good resistance to sagging.
Does not elongate.
Applications:
It is suitable for all vehicles. Any professional application device can be used for application. The most suitable is the Powerline II or Electraflow gun.		 Request Form
Terostat 8597 HMLC - Fast Glass Adhesive It has good resistance to sagging.
Does not elongate.
Applications:
It is suitable for all vehicles. Any professional application device can be used for application. The most suitable is the Powerline II or Electraflow gun.		 Request Form
Terostat 8599 HMLC - High Speed Glass Adhesive It has good resistance to sagging.
Does not elongate.
Applications:
It is suitable for all vehicles. Any professional application device can be used for application. The most suitable is the Powerline or Electraflow gun.		 Request Form
Terostat 8590 - Standard Glass Adhesive It has good resistance to sagging.
Does not elongate.
Applications:
It is suitable for all vehicles. Any professional application device can be used for application. Best is Powerline II or Electraflow gun.		 Request Form
Terostat 8597 - Fast Glass Adhesive It has good resistance to sagging.
Does not elongate.
Applications:
It is suitable for all vehicles. Any professional application device can be used for application. The most suitable is the Powerline II or Electraflow gun.		 Request Form
Terostat 8599 - High-Speed Glass Adhesive It has good resistance to sagging.
Does not elongate.
It provides high holding power.
Applications:
It is suitable for all vehicles. Any professional application device can be used for application. The most suitable is the Powerline II or Electraflow gun.		 Request Form
Terostat 8517 H - Glass Primer It improves adhesion.
It has excellent UV protection.
Provides corrosion protection in minor flange damage.
Applications:
Increasing the effect of adhesive on all auto glass. Application is done with Teroson primer brushes. (Wool Brush)		 Request Form
Terostat 8519 P - Primer and Activator It improves adhesion.
It has excellent UV protection.
It is an excellent activator for PUR / PVC coatings.
Provides activation of old PUR adhesive residue (older than 6 hours).
Applications:
Increasing the effect of the adhesive on all vehicle windows. It can be used in all vehicles with PUR glass. Application is done with Teroson primer brushes. (Wool Brush)		 Request Form
Terodicht Elastic - Rubber Sealing It has good resistance to sagging.
Ideal for leaky windshields, even in rainy conditions.
It is water resistant.
Applications:
It is suitable for emergency sealing on all vehicles with rubber wick fixed windows. Any professional application device can be used for application. The most suitable is the Staku gun.		 Request Form
Teroson FL + Surface Cleaner Cleaner for very good surface preparation.
Evaporation time is very short.
Applications:
Suitable for surface preparation of windshield and parts (glass, plastic, metal). Application is done with a lint-free cloth or brush (Teroson FL also acts as a diluent for many Teroson products.		 Request Form
Loctite® 319 Rear View Mirror Adhesive It can tolerate different thermal expansion of parts. Cures in small cavities with the help of Activator Loctite®7649. Applications: Bonds materials such as metal, glass, ceramic or plastic. Request Form
Loctite® 317 / Activator 734 Glass - Metal Adhesive Ideal for bonding metal to glass. It shows good resistance in humid environments. Temperature resistance is good. Applications: Glass-metal bonding. It can be used to stick the rear view mirror to the glass in vehicles. Request Form
Loctite® 3863 Resistance Repair Kit Its conductivity is high. It is fast and easy to use. Applications: It is used in the repair of damaged and broken rear window heaters. Request Form
Teroson Bond Black Primer TEROSON® BOND Black Primer is specially formulated for the TEROSON BOND Windshield Adhesive application system as a pre-treatment of bonding surfaces. When applied as a base layer for 1 and 2 component polyurethane beads, it promotes the adhesion of the windshield adhesive to glass and glass ceramics and UV protection. Request Form
Elastic Bonding
Product Name Description TDS
Terolan 53 Special Brush Mark Sealant It provides good adhesion on oily / greasy surfaces (parts that cannot be cleaned completely).
It adheres very well to bare, primed and painted metal parts.
It is compatible with the original application image of the factory. (Brush mark)
Applications:
Front and rear apron, under the passenger compartment, side panel, wheel arches. The application is made with a Teroson brush.		 Request Form
Terostat 9100 / 9200 Body Sealant Does not contain solvent.
It has good resistance to sagging.
It is compatible with the original application of the factory. (Brush mark)
Applications:
It can be used wherever sealing, bonding and fast painting is required. Especially suitable for bonding performance accessories such as spoilers, trim strips. It is best to use a Powerline II or Electraflow gun.		 Request Form
Terostat 9320 Spray Sealant It does not contain solvent and isocyanate.
It provides very good adhesion without primer.
Its resistance to UV and weather conditions is very good.
Good resistance to sagging nets, can be applied by spraying.
Applications:
Provides OEM compatible pattern on all vehicles. For best application use the Teroson MultiPress gun.		 Request Form
Terostat 9320 SF - Süper Hızlı 6’sı 1 arada Request Form
Terostat VII - Kalıcı Butil Sızdırmazlık Şeridi Request Form
TECHNOMELT EP 4555 PA Request Form
Loctite Air Sausage Gun 400 ml. air gun for silicone. Request Form
Instant Adhesive
  • Adhesion of body elements.
  • Emergency repairs.
  • Light structural bonding.
Product Name Description TDS
Loctite® 401 - Instant Adhesive General purpose fast adhesive. It bonds a wide variety of similar and dissimilar materials. (Metals, rubber, wood, cardboard, ceramics, also most plastics) It provides very high strength in parts where the bonding gap is small. Applications: Emblems, plastic parts, rubber seals. Request Form
Loctite® 406 - Instant Adhesive It is used for fast bonding of rubber (including EPDM), plastics and elastomers. It should be used together with Loctite770 primer for PE and PP bonding. Applications: Bonding of rubber and plastic parts. Request Form
Loctite® 3090 - Gap-Filling 2-Component Adhesive fast curing Gap filling: up to 5 mm Gel-based: non-drip formula allows vertical and overhead applications. Flawless and clean application with syringe Temperature resistance: -40 - + 80 oC It bonds perfectly to all common surfaces (metals, many plastics, rubber, wood, paper...). Applications: Perfect for quick repair of broken plastic parts and any emergency repairs. Request Form
Teroson Adhesive Spray Provides high initial strength. (Wait 10 minutes for the solvent to evaporate.)
Contact and pressure sensitive adhesive spray.
It is particularly suitable for bonding porous materials.
Applications:
Fabric, polyester and polyester foam, leather, cardboard and coatings.		 Request Form
Terostat 9220 - Strong Adhesive Strong adhesive for flexible, permanent, non-marking spot welding.
Adheres to various surfaces without primer.
Highly resistant to aging, weathering, UV light and salt water.
It does not contain isocyanates and solvents.
Applications:
It is used to bond metal to metal, plastic (except PP and PE), wood, painted surfaces. Any application device can be used for the application. It is best to use a Powerline II or Electraflow gun.		 Request Form
Teromix 6700 It provides fast curing, high strength regardless of temperature / humidity.
Adheres to a variety of surfaces.
Spot welding can be done before curing.
Does not contain solvent.
Applications:
It is used for bonding metal to metal, plastic (except PP and PE), wood, painted surfaces. It can be applied easily with a Teromix gun and mixed easily with twin cartridges and a static mixer.		 Request Form
Loctite 401 LOCTITE® 401 is a fast-curing instant adhesive designed for mounting difficult-to-bond materials that require even stress distribution and high tensile and/or shear strength. The product provides fast bonding of various materials, including metal, plastic and elastomer. Request Form
Loctite 406 LOCTITE® 406 is an instant adhesive specially designed for fast bonding of plastics and rubbers. This product provides extremely low viscosity. When used with LOCTITE primer for cyanoacrylates, it can also be effective on plastics that are difficult to bond. Request Form
Loctite 4062 LOCTITE® 4062 is a clear, colorless, ethyl-based instant adhesive particularly suitable for plastics and rubbers. Request Form
Loctite 415 LOCTITE® 415 is a clear, colorless, high viscosity, methyl-based instant adhesive. It is well suited to metals and also suitable for rubber and plastics, but also for polyolefins in combination with Primer LOCTITE® SF 770 or LOCTITE® PC 7239. Adhesion time is 20 - 40 seconds. Request Form
Loctite 454 LOCTITE® 454 is an instant adhesive designed for mounting difficult-to-bond materials that require even stress distribution and high tensile and/or shear strength. Request Form
Loctite 460 LOCTITE® 460 is a transparent, colorless, low-viscosity, low-odour, low-whitening alkoxyethyl-based product that provides fast adhesion (5-20 seconds) to a wide range of materials, including metals, plastics and elastomers. Request Form
Loctite 480 LOCTITE® 480 is an instant adhesive designed for mounting difficult-to-bond materials that require even stress distribution and high tensile and/or shear strength. It is a rubber-reinforced adhesive that offers increased flexibility and peel strength along with improved shock resistance. Request Form
Loctite 496 Instant adhesive ideal for metal surfaces. Request Form
Loctite O-Ring Kit O-ring bag (Does not include LOCTITE 406 20gr.) Request Form
Structural Bonding – Epoxies
Product Name Description TDS
Terokal 5055 - Panel Adhesive Excellent bonding strength.
Adheres and seals in a single application without primer.
Applications:
Solvent-free high performance adhesive for ceiling and panel (aluminum, steel and SMC) bonding. Application can only be done with Powerline II or Electraflow gun. Easy to apply with universal cartridge and static mixer		 Request Form
Terocore® 1401 - Body Booster It is suitable for strengthening weak body parts.
Reinforces hollow structures and large surfaces.
Low density foam provides great weight savings.
Applications:
High strength reinforcing foam used to provide structural strength in vehicle bodies. Complies with OEM repair methods. Application can only be done with Powerline II or Electraflow gun. It is easy to apply with universal cartridge and static mixer.		 Request Form
Loctite® 3430 - Fast Epoxy For general purpose applications. It can cure at low temperatures and thick applications. It is water resistant and impact resistant. It can be painted over. Its temperature resistance is between -40°C and +120°C. Applications: It bonds a wide variety of similar and dissimilar materials (eg metal, marble, ceramic, glass, stone, wood, concrete, plastic). Request Form
Teroson Double Sided Tape Adhesive Tape on Both Surfaces
Excellent adhesion to metal, glass, painted surfaces and many plastics.
It is weather resistant.
It is resistant to sunlight.
It is water resistant.
Applications:
It can be used to stick brand, model inscriptions and protective strips on vehicles.		 Request Form
Loctite® 3463 - Metal MagicTM Stick Kneadable epoxy adhesive. Adheres to damp surfaces and hardens even under water. It is resistant to abrasion and most chemicals. Steel filled product. Applications: Ideal for emergency repairs that need to be done quickly but last a long time. It can be drilled, sandblasted, painted after hardening. It repairs minor cracks in the frame, suitable for rebuilding damaged threaded holes. Request Form
Loctite 962 LOCTITE® 962 is a red, opaque, high strength, fluorescent, thixotropic, methacrylate ester acrylic adhesive designed for sealing core plugs. Typical applications include sealing and securing cylindrical metal assemblies, Eg. engine block cup and hub plugs, water pump seals, and hub and shaft assemblies. Request Form
Loctite AA 330/7388 LOCTITE ® AA 330 / LOCTITE ® SF 7388 kit consists of 2 parts: slightly cloudy, colorless, pale yellow, general purpose, urethane methacrylate ester acrylic adhesive and heptane/isopropanol based activator. They are used together to bond metal, wood, ferrite, ceramic and plastic materials. Request Form
Loctite AA 3963 LOCTITE AA 3963 is a clear, low-viscosity adhesive that offers fast and non-sticky LED curing and is designed for applications that require fast curing and tough adhesion. Request Form
Loctite AA H3300 LOCTITE® AA H3300 A highly thixotropic, 2-part, room temperature-curing methacrylate adhesive system that provides fixation strength in 6-12 minutes. It forms flexible bonds and maintains its strength over a wide temperature range. Request Form
Loctite AA V5004 LOCTITE® AA V5004™ is a structural acrylic adhesive that provides durability and excellent adhesion to plastics, metals and composites. The cured product is nearly transparent, making it well-suited for bonding applications that require clear, invisible glue lines. LOCTITE® AA V5004™ has very high shear strength and resistance to peeling, fatigue and impact loads. This product will adhere to a wide variety of substrates including most structural thermoplastics, thermosets, FRP, stone, ceramics, steel and aluminum. LOCTITE® AA V5004™ is useful for joining different materials. Request Form
Loctite AA3295 LOCTITE® AA 3295 is a 2-component, green, general purpose structural bonding premix fluid suitable for bonding metals, ceramics and plastics. It has good impact resistance and an operating temperature range of up to +120°C. Shear strength is 25 N/mm² and setting time is 5-10 minutes. Does not require activator. Request Form
Loctite DRI 2040 LOCTITE® DRI 2040 is a general purpose medium to high strength pre-applied threadlocking adhesive. Once cured, this product will also act as a thread sealant. Request Form
Loctite EA 3430 LOCTITE EA 3430 is a five minute - 2-part epoxy adhesive that creates an optically clear bond line. The product is water resistant as well as developing high strength on a variety of surfaces. This adhesive is a general purpose adhesive and is ideal for many DIY applications. Request Form
Loctite EA 3475 LOCTITE® EA 3475 is a 2-component, aluminum-filled epoxy adhesive suitable for repairing and restoring worn and damaged machinery, repairing and replacing worn parts such as shafts, housings, keyways and flanges, as well as broken or damaged parts. Request Form
Loctite EA 9492 LOCTITE® EA 9492 is a high temperature resistant two component epoxy adhesive. Its viscosity is lower than Hysol 9491, but it has the high performance of Hysol 9491. It is a general purpose adhesive used for repairing and bonding a wide variety of materials. Request Form
Loctite EA 9497 LOCTITE® EA 9497™ is a medium viscosity, two-component, room temperature curing epoxy adhesive that bonds a wide variety of materials, making it suitable as a general purpose adhesive. LOCTITE® EA 9497™ is ideal for heat dissipation applications such as bonding sheet metal for high heat transfer and coating electrical components. Request Form
Loctite FREKOTE 770-NC LOCTITE® FREKOTE 770NC is a clear, solvent-based, moisture-curing epoxy release agent for advanced compositions and FRP polyester parts. It is a versatile semi-permanent separator with high thermal stability, providing a high shear rate when faced with die geometry problems. Request Form
Loctite FREKOTE B15 LOCTITE® FREKOTE® B15 is a clear, colorless, solvent-based polymer mold sealer specially formulated for composite and metal molds with microporosity issues, minor surface scratches or defects. When used with other FREKOTE products, it provides an excellent base coat that enhances the separation benefits offered. Request Form
Loctite EA 3421 Moisture resistant, high strength, long working time epoxy. Request Form
Loctite EA 3422 High strength fast drying epoxy. Request Form
Loctite EA 3425 High viscosity reinforced, glass fiber reinforced, ideal for bonding plastics and metals. Request Form
Loctite EA 3450 Structural adhesive, 2-component epoxy. Fast curing, ideal for metal repair. Request Form
Loctite EA 3463 Magic steel rod, potable water approved, steel powder filled epoxy. Request Form
Loctite EA 3471 Steel filled putty - Metal set ST 1. Request Form
Loctite EA 3472 Steel filled liquid - Metal set ST 2. Request Form
Loctite EA 3473 Steel-filled putty has the ability to dry in 5 minutes - Metal ST3. Request Form
Loctite EA 3474 Mineral filled putty is resistant to friction wear - Metal Set M. Request Form
Loctite EA 3478 Ferro Silicone filled shaft repair paste. Request Form
Loctite EA 9450 Epoxy, which has the ability to stick on vertical surfaces without sagging, dries in 5 minutes. Request Form
Loctite EA 9466 Medium viscosity, reinforced, long working time epoxy. Request Form
Loctite EA 9483 Ultra clear, general purpose liquid epoxy. Request Form
Loctite 96001 Dual cartridge manual epoxy application equipment 1:1, 2:1. Suitable for 50 ml products. Request Form
Plastic Repa
Product Name Description TDS
Terokal 9225 - Plastik Yapıştırıcı Request Form
Terokal 9225 SF - Plastik Yapıştırıcı Hızlı Request Form
Terokal 150 - Primer Perfect base coat.
Evaporation time is very short.
Applications:
Plastic Repair Kit and Terokal 9225, 9225 SF are used before Teroson Plastik sealant and paint. It allows easy and perfect application.		 Request Form
Teroson FL - Universal Cleaner It can be used before and after any bonding or sealing operation on all surfaces.
Use Teroson FL to repair plastic, glass or metal parts.
Cleaning properties are very good.
Solvent evaporates extremely quickly.
Applications:
Teroson FL is also a diluent for many Teroson products such as underbody coatings, plastic repair adhesives, glass bonding products.		 Request Form
Teroson Plastic Repair Kit Contents:
3 x 2 x 25 ml Terokal 9225
9 static mixers
150 ml spray Terokal 150
1000 ml canister Teroson FL
1 support cloth
1 Teromix pistol
Application instructions
Applications:
Bumper, spoiler, apron etc.		 Request Form
Teroson Plastic Sealant It does not shrink, has very good sag strength.
It can be sanded after only 15 minutes.
For ideal adhesion to different types of plastics.
Applications:
For damage such as scratches and stone chips. For touch-ups after plastic repair in combination with Terokal 150.		 Request Form
Loctite DRI MICROCAPS P3 Low viscosity sealant that will provide "continuous" torque. Works on all types of coatings and most plastics. Request Form
Boady Repair
Product Name Description TDS
Teroson Zinc Spray Anti-corrosion coating for vehicle body repair and maintenance.
It is electrically conductive (wet and dry).
It is not painted over.
Applications:
It is used as a corrosion protection between welding surfaces during MIG and spot welding. It is used in vehicle body repairs for the purpose of galvanizing welding points and especially the joints of parts that will not be painted and originally galvanized.		 Request Form
Loctite 7800 Çinko - Alüminyum Sprey Provides excellent cathodic corrosion protection on ferrous metals. Provides protection by restoring worn or treated parts on galvanized parts. Applications: Retouching metal parts after welding, long-term preservation of metal assemblies. Request Form
Terotex 2000 HS Permanent elastic protection against corrosion.
Ideal for underbody repairs, especially for protection against stone chips.
Primer for coating painted parts or surface-cleaned metals.
Applications:
Protects any underbody coating applied at the OEM. Compatible with existing PVC and rubber/resin-based protective coatings.		 Request Form
Terotex Record 2000 Aqua – Water-based Underbody Coating Does not contain VOCs, does not smell of solvents.
It does not crack in the cold.
Compatible with most surfaces and OEM coatings.
Very high solids content.
Applications:
Authentic repair of applied OEM coatings for permanent vehicle underbody protection.		 Request Form
Terotex Super 3000 Covering of replacement parts such as bumpers or mudguards for noise reduction.
Compatible with standard OEM paints.
Patterned coating can be applied.
Applications:
It creates a surface compatible with the OEM output. For wear-resistant coating of visible auto parts requiring fast painting. For patterned bumpers and side panels.		 Request Form
Loctite 3090 LOCTITE® 3090 is a 2-component, fast-curing, gap-filling adhesive with excellent bonding properties, making it suitable for a variety of substrates including plastic, rubber and metal. It is designed for assembly of parts with various or uncertain bonding gaps up to 5 mm or for applications where complete curing of excess adhesive is required. Request Form
UV Protected and Acrylic Based Adhesive
Product Name Description TDS
LOCTITE AA 302 LC Acrylic adhesive with plastic - metal, plastic - glass bonding. Request Form
LOCTITE AA 3038 A&B Polyolefin (PP-PE) adhesive. Request Form
LOCTITE AA 317 Glass - metal and metal - metal bonding. It is recommended to be applied with LOCTITE 734 activator. Request Form
LOCTITE AA 3295 Reinforced acrylic adhesive has gap-filling properties. Request Form
LOCTITE AA 330/7388 Multibond set (Adhesive and Activator) Structural adhesive feature. Request Form
LOCTITE AA 3491 Acrylic adhesive with the ability to bond glass specifically to aluminum. Request Form
LOCTITE AA 350 LC Acrylic adhesive with good moisture resistance, with the ability to bond glass to glass. Request Form
LOCTITE AA 358 LC Acrylic adhesive with the ability to bond glass to glass. Request Form
LOCTITE AA V5004 Suitable for metal, plastic and glass surfaces. It is transparent, two-component and shows first hold in 3 minutes. Request Form

Cookies are used on this website in order to improve the user experience and ensure the efficient operation of the website.

More Information