Surface Treatment
| Product Name | Description | TDS |
|---|---|---|
| BONDERITE C-AK 187 G | BONDERITE C-AK 187 G is a high alkalinity, heavy duty, dip, spray and electrocleaner formulated for rapid and effective cleaning of steel in continuous sheet and strip mills. It can also be used to remove oils from brass prior to electroplating. BONDERITE C-AK 187 G contains a blend of surfactants for rapid penetration and emulsification of a wide range of rolling oils. | Request Form |
| BONDERITE M-NT 4831 JC23 WENS+ IDH2584484 | 2-part, chrome-free, spray/dip that generates conversion coating layers on aluminum and its alloys. Commonly used for light metal finishing, BONDERITE® M-NT 4831 is a 2-part, chrome-free, spray/dip that generates conversion coating layers on aluminum and its alloys. Commonly used for light metal finishing, it provides excellent corrosion resistance and very good adhesion properties for subsequent painting. Low curing temperature means the running costs of this process are less than for comparative methods. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. |
Request Form |
| BONDERITE O-PC AQ-210 | Metal anti-corrosion coating based on vinyl acrylic and polyvinylidene chloride, carbon black pigment, fillers and an anti-corrosive pigment. BONDERITE® O-PC 100 (Known as SUNCORITE AQUA 100) is a black, lead-free, water-based anti-corrosion coating for metals based on a co-polymer of vinyl acrylic and polyvinylidene chloride and a combination of carbon black pigment, fillers and an anti-corrosive pigment. It is free of toxic chromate anti-corrosive pigments. It avoids the dangers of fire hazard and harmful solvents. |
Request Form |
| BONDERITE M-NT 4830 JC23 WENS+ IDH 2580209 | It is a product used for surface passivation of aluminum and aluminum alloys, providing a transparent coating in chrome-free dip and spray systems. | Request Form |
| BONDERITE C-AK 359 JC23KG IDH 2587490 | Industrial cleaner - Yellow, liquid spray parts cleaner especially formulated for degreasing all types of metals. BONDERITE® C-AK 359 is a yellow, liquid spray product, especially formulated for degreasing all types of metals. It has been designed especially for removal of polishing pastes. It has good detergent properties and does not attack aluminum or copper-containing metals. |
Request Form |
| WD-40 ANTI CORR LUBR AER 400 ML IDH 415830 | General purpose lubricant and rust remover Dual-use spray cap Application Areas: - Thanks to the high attraction feature against metal in the WD-40 formula, it completely covers the surfaces even under humid conditions. - It forms a protective layer by entering between the metal surface and moisture by spraying, brush applications or even in the dipping method. - With this feature, WD-40 is very useful in cases where electrical contact is involved, as it immediately eliminates short circuits related to moisture. - With its metal attraction feature, WD-40 penetrates rusty and corroded surfaces and removes rust from metal, wires, ropes as an effective rust remover, eliminates wear on stuck nuts, connections, control mechanisms and other metal parts, and allows the parts to work freely. - WD-40 spreads completely on metal surfaces and covers even microscopic pores. This layer formed and - WD-40's moisture-repelling formula provide protection against moisture and other rust-forming substances on the metal surface. If the metal is used regularly, the protection will continue. - WD-40 formula completely cleans very thick layers of grease and dirt, label and adhesive residues from the surface without containing any abrasive substances. It also protects against corrosion and rust with the film layer it creates. - Thanks to its high attraction feature, WD-40 ensures that the lubricants it contains spread over the entire surface and adhere perfectly to the moving parts. - Since WD-40 does not contain silicone or any additives that collect dust and dirt, it does not form a dirt layer on the surface. | Request Form |
| WD-40 ANTI CORR LUBR AER 200 ML IDH 415829 | General purpose lubricant and rust remover Dual-use spray cap Application Areas: - Thanks to the high attraction feature against metal in the WD-40 formula, it completely covers the surfaces even under humid conditions. - It forms a protective layer by entering between the metal surface and moisture by spraying, brush applications or even in the dipping method. - With this feature, WD-40 is very useful in cases where electrical contact is involved, as it immediately eliminates short circuits related to moisture. - With its metal attraction feature, WD-40 penetrates rusty and corroded surfaces and removes rust from metal, wires, ropes as an effective rust remover, eliminates wear on stuck nuts, connections, control mechanisms and other metal parts, and allows the parts to work freely. - WD-40 spreads completely on metal surfaces and covers even microscopic pores. This layer formed and - WD-40's moisture-repelling formula provide protection against moisture and other rust-forming substances on the metal surface. If the metal is used regularly, the protection will continue. - WD-40 formula completely cleans very thick layers of grease and dirt, label and adhesive residues from the surface without containing any abrasive substances. It also protects against corrosion and rust with the film layer it creates. - Thanks to its high attraction feature, WD-40 ensures that the lubricants it contains spread over the entire surface and adhere perfectly to the moving parts. - Since WD-40 does not contain silicone or any additives that collect dust and dirt, it does not form a dirt layer on the surface. | Request Form |
| BONDERITE S-OT J JC22KGWE IDH 2587488 | Brown intermediate degreaser and water-emulsifiable corrosion protection agent for cleaning and preserving metals for storage or shipment. BONDERITE® S-OT 4454 is a brown intermediate degreaser and water-emulsifiable corrosion protection agent for cleaning and preserving metals for storage or shipment. The product forms a stable emulsion with water that can be used safely on all metals, most types of paint or coating, plastics and rubber. Free of silicone, the agent can be easily removed with solvents or mildly alkaline solutions.
|
Request Form |
| BONDERITE C-AK 6706 JC32KG WNS | Silicate-free, mild alkaline, powerful liquid industrial cleaner based on borates, caustic potash, salts of organic acids and non-ionic surfactants. BONDERITE® C-AK 6706 (known as NOVASPRAY 6706) is white to yellowish, silicate-free, mild alkaline, powerful liquid industrial cleaner based on borates, caustic potash, salts of organic acids and non-ionic surfactants. It is used for cleaning and degreasing iron, steel, colored metals and zinc coated material in spray processing. It can be used in ultra filtration without any problems. |
Request Form |
| BONDERITE C-AD 5003 JC23 WENS+ IDH 2562792 | Additive used as a cleaning booster for alkaline and neutral solutions. Ideal for cleaning slightly contaminated surfaces and in spray processes. BONDERITE® C-AD 5003 is a cleaning booster made of nonionic surfactants. It is suitable for all materials, and ideal for boosting the cleaning performance of mildly alkaline and neutral cleaner solutions. Perfect for cleaning slightly contaminated surfaces and in spray processes, it has an operating temperature of 50ºC to 80ºC (122ºF to 176ºF). |
Request Form |
| Bonderite C-AK 1563 IDH 604626 | This polyacrylate and phosphate alkaline cleaner can be applied by either spray or immersion for multi-metal applications, including pre-treatment processes. BONDERITE® C-AK 1563 is an alkaline polyacrylate and phosphate based liquid cleaner designed for steel, galvanized steel and aluminum. Ideal for metal pre-treatment processes, it can be applied by both spray and immersion processes. Its operating temperature is 50ºC to 80ºC (122ºF to 176ºF).
|
Request Form |
| BONDERITE M-NT 1455 WIPE ML IDH 2156526 | A chromium-free, dry-in-place metal pre-treatment agent for conversion coating of a wide array of metals. Give aluminum, zinc and its alloys, and cold-rolled steel surfaces a robust conversion coating treatment with BONDERITE® M-NT 1455. This dry-in-place treatment solution is entirely chromium-free and provides excellent paint adhesion and corrosion resistance. When applied, it forms a uniform coating film, increasing the durability of paint finishes. |
Request Form |
| BONDERITE M-AD 252 JC30 KG IDH 1293315 | Liquid metal pre-treatment additive and used to decrease the pH-value of metal treatment baths. It may be used in either spray or immersion processes. BONDERITE® M-AD 252 is a liquid metal pre-treatment additive and used to decrease the pH-value of metal treatment baths. It may be used in either spray or immersion processes. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. |
Request Form |
| BONDERITE M-AD 260 JC30KG IDH 1317167 | It is a product used for chemical cleaning and heat exchanger cleaning in phosphate and degreasing baths. | Request Form |
| BONDERITE L-GP M TA-402 1KG AN IDH 1239197 | BONDERITE® L-GP M TA 402, once applied and cured, lubricates efficiently over a broad temperature range, eliminating stick, galling, seizing and separating metal surfaces at low speeds, under extreme loads and in spite of vibration and shock. The ability of BONDERITE® L-GP M TA 402 to be applied by screen printing means that wastage of the coating can be eliminated and it can be applied to precise areas in carefully controlled thicknesses. It is well suited to automated production lines. | Request Form |
| BONDERITE M-CR C7100 30KG IDH 1992648 | Cr+6 is a chromating product. When added to water, it forms a chromate layer from light yellow to brass yellow on aluminum and aluminum alloys. | Request Form |
| BONDERITE C-NE 5177 DR60KG TR IDH 164049 | It is a product containing phosphate, tenside and organic rust protective components, which is used as a degreasing agent in spray systems and does not contain nitrite. It temporarily protects metal surfaces from rust by passivating them after cleaning. It is used in single and multi-zone high pressure washing cabins. | Request Form |
| BONDERITE M-AD 45 JC30KG IDH 28633 | BONDERITE M-AD BASE EP AERO, metal pre-treatment BONDERITE® M-AD BASE EP AERO is a white, viscous thickener liquid for metal pre-treatment applications. Applied by brush, the product is designed as a thickener for chromate conversion coatings. With regard to solution make-up, dissolve 2.2 lb (1 kg) of product into 0.264 gal (1 L) of water and add conversion coating chemical in foreseen concentration. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. |
Request Form |
| BONDERITE C-NE 5088 JC30KGTR IDH 1414941 | It is a product consisting of organic corrosion inhibitors and nonionic surfactants suitable for use on steel, iron and non-ferrous metals. |
Request Form |
| BONDERITE C-NE N JC 34KGWENS IDH 1802797 | BONDERITE® C-NE 5225 is an aqueous, electrically conductive, neutral cleaner designed for steel, cast iron and silumin workpieces. This product contains phosphates, borates, organic and inorganic corrosion protection compounds and nonionic cationic surfactants. | Request Form |
| BONDERITE S-ST 14 JC25KGTR IDH 164191 | It is a highly alkaline degreaser and paint remover from hair surfaces. It is applied by dipping method. | Request Form |
| BONDERITE M-PA BLACK OXIDE 25KG IDH 164336 | It is a manganese-containing powder product that forms a dark black oxide layer on iron and steel surfaces. This iron oxide layer improves the appearance of the parts and increases corrosion resistance when treated with protective oils and does not change the dimensions of the parts. | Request Form |
| BONDERITE M-ZN 142 JC30KGTR IDH 164217 | Zinc coated steel is a liquid product that forms a fine crystalline zinc phosphate layer, weighing 2-6 gr/m2, on the surfaces of steel, iron and their alloys by dipping method. | Request Form |
| BONDERITE C-AK UPON BG25KG IDH 164064 | It is a product used to clean oil and dirt on steel, casting and plastic parts after cutting, cold forming and pressing. It can be used on very dirty and oily contaminated surfaces, pigmented surfaces, and dirty surfaces containing fatty acids. | Request Form |
| BONDERITE C-AK 5800 DR65KG TR IDH 164068 | Clear, colorless, alkaline industrial spray cleaner for parts with high degreasing performance on cast iron, steel and plastic parts which also provides temporary rust prevention. BONDERITE® C-AK 5800 is a clear, colorless cleaner for spray washers to remove heavily soiled, greasy contaminants and drawing compounds from cast iron, steel and plastic parts after cutting, stamping, pressing or cold forming. Due to its high polymer phosphate content this cleaner can also be used in hard water and also provides temporary rust prevention. Working Temperature is +40 to +80°C. |
Request Form |
| BONDERITE M-AC 50-1 CF 25KG TR IDH 164229 | Metal pre-treatment activating product for facilitating phosphate coatings on iron, steel, aluminum and zinc surfaces. Applied by dip and spray. BONDERITE® M-AC 50-1 is a metal pre-treatment phosphating product for metals. Applied by immersion and spray processes, this powdered activating product is added to the rinsing bath prior to phosphate treatment. It is effective in facilitating uniform and fine crystalline phosphate coatings on iron, steel, aluminum and zinc surfaces. BONDERITE M-AC 50-1 can also be used in coil lines. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. |
Request Form |
| BONDERITE M-ZN C-5012 DR80TR IDH 164216 | Granodine C5012 is a liquid product that forms a 3-8 gr/m2 thick, fine crystalline zinc phosphate layer on iron, steel and zinc surfaces, applied by the dipping method and produces little sludge. Granodine 5012 provides very good adhesion and corrosion resistance for organic coating materials. Contains nickel. | Request Form |
| BONDERITE M-NT 4831 JC31KG IDH 28651 | 2-part, chrome-free, spray/dip that generates conversion coating layers on aluminum and its alloys. Commonly used for light metal finishing, BONDERITE® M-NT 4831 is a 2-part, chrome-free, spray/dip that generates conversion coating layers on aluminum and its alloys. Commonly used for light metal finishing, it provides excellent corrosion resistance and very good adhesion properties for subsequent painting. Low curing temperature means the running costs of this process are less than for comparative methods. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. |
Request Form |
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| BONDERITE C-IC 3400 JC30KGTR IDH 1246681 | BONDERITE® C-IC 3400 is a phosphoric and sulfuric acid containing, fast acting pickling and derusting agent for iron and steel and aluminium with degreasing action.Surfaces pickled with this product can be lacquered after rinsing and phosphating or passivating. This product is used in immersion process. | Request Form |
| BONDERITE C-NE 3300 JC26KG RWE IDH 767565 | BONDERITE® C-NE 3300 is an aqueous neutral cleaner specially designed for steel, cast iron and aluminum. It is composed of organic corrosion protection components, active cleaning agents and inhibitors, and is ideal for cleaning after machining, cutting, stamping, forming, and simultaneous passivation of metals. It has high demulsifying properties, is suitable for high pressure applications, and can be applied by spray processes. Due to its long bath-life times, it also has very good sustainability. | Request Form |
| BONDERITE C-AD 0508 JC25KG IT | BONDERITE® C-AD 0508 is a clear, colorless cleaning booster spray made of non-ionic surfactants. A change of color is caused by raw material but has no impact on performance. It is used in spray processes to boost the cleaning performance of mildly alkaline as well as neutral cleaning solutions. It is suitable for all materials and can be used in the cleaning of slightly contaminated surfaces. | Request Form |
| BONDERITE C-AK 5801 | BONDERITE® C-AK 5801 (known as P3-UPON 5801) is a slightly yellow, alkaline industrial cleaner liquid composed of alkalis, phosphonates, acrylate copolymers, salts of organic acids and non-ionic surfactants. It is used after cutting, stamping, pressing or cold forming of cast iron and steel parts to remove concentrated and greasy contamination and pigmented, fatty acid containing drawing compounds. | Request Form |
| Request Form | ||
| Request Form | ||
| Request Form | ||
| BONDERITE L-GP GP 1904 EU 20 AN IDH 1239327 | BONDERITE® L-GP GP 1904 EU is a graphite co-dispersion lubricant of fluorocarbon resin and carbon in a resin thermosetting binder, designed to be applied by spray. It produces a low friction coating free of stick-slip characteristics. The product is recommended for metal substrates.
|
Request Form |
| Request Form | ||
| BONDERITE C-AD CW JC25KG WINS IDH 74692 | BONDERITE® C-AD CW is a liquid metal pre-treatment cleaning booster based on non-ionic surfactants. It is used in spray- and spray/immersion processes and must be combined with a suitable cleaner. | Request Form |
| BONDERITE C-AK 4215 NC-LT AERO | A 1-part, white granular mix designed specifically for cleaning ferrous and nonferrous alloys prior to metal bonding.If you’re looking for an effective, non-corrosive alkaline cleaning solution, BONDERITE® C-AK 4215 NC-LT AERO is the perfect pick. This white cleaning agent is developed for cleaning ferrous and nonferrous alloys by spray, immersion and ultrasonic methods at low temperatures. It’s water-soluble and non-corrosive to aluminum, steel, copper and plated metals, making it ideal for cleaning hydraulic and fuel components and metals prior to metal bonding. It is free of chromate and harsh caustic substances and contains a balanced blend of organic surface-active agents that gives it excellent foam control – even under conditions of severe agitation.
|
Request Form |
| BONDERITE M-AD 80L JC30KG TR IDH 1267617 | BONDERITE® M-AD 80L is a clear, liquid metal pre-treatment additive composed of inorganic salt and water which is designed to correct/increase the pH-value in BONDERITE baths. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| BONDERITE S-PR 6750 JC30KGTR IDH 1415263 | BONDERITE S-PR 6750 30KG is used in the metalworking industry, in the production of engines and transmissions, for cleaning after cutting, stamping, or deep drawing processes, as well as for the simultaneous passivation of steel and cast iron materials. | Request Form |
| Request Form | ||
| BONDERITE M-FE 7760 DR70KG TR IDH 1338487 | BONDERITE® M-FE 7760 is a liquid cleaner/coater based on a combination of acidic phosphates and highly effective surfactants, used in spray or high-pressure equipment. It degreases and cleans steel, galvanized steel, and aluminum. On cold-rolled steel and iron, it forms an iron phosphate layer for excellent adhesion of organic coatings and enhances corrosion resistance. Please note: BONDERITE M products are used for surface modification of metals and are typically applied in a multi-stage process. The performance of these surface treatments depends on various factors, such as prior cleaning or etching steps (BONDERITE C portfolio), line design, or process parameters. | Request Form |
| Request Form | ||
| Request Form | ||
| BONDERITE M-ZN ZN- 2 JC30KG IDH 1957959 | BONDERITE M-ZN ZM-2 (Known as BONDERITE ZM-2) converts the surface of a metal substrate into a fine polycrystalline zinc phosphate coating. The coating increases the adhesion and durability of organic paints and finishes and helps to inhibit corrosion. The BONDERITE M-ZN ZM-2 phosphate coating is free of regulated heavy metals such as nickel. BONDERITE M-ZN ZM-2 may be applied by either spray or immersion to cold rolled steel, galvanized, and/or aluminum surfaces, in mixed production. | Request Form |
| Request Form | ||
| Request Form | ||
| Request Form | ||
| BONDERITE C-AK 1574 A 1250 IDH 1767493 | BONDERITE® C-AK 1574 is a strongly alkaline phosphate-based liquid cleaner specially designed for steel, zinc plated steel, and aluminum. Perfect for removing rust, paint and other hard to clean soils from steel without staining, it is ideal for remanufacturing and metal pre-treatment processes. It can be applied by both spray and immersion processes and must be combined with a suitable cleaning booster. | Request Form |
| Request Form | ||
| PREPALANE X TM 25KG IDH 1242262 | Prepalene X is a liquid activating product, based on zinc phosphate, for adding to the rinsing bath before a dip or spray zinc phosphate treatment. It’s very effective in producing uniform and fine crystalline phosphate coatings on iron, steel, aluminum and zinc surfaces. | Request Form |
| Request Form | ||
| BONDERITE C-AK 5800 JC30KG TR IDH 2387951 | BONDERITE® C-AK 5800 is a clear, colorless cleaner for spray washers to remove heavily soiled, greasy contaminants and drawing compounds from cast iron, steel and plastic parts after cutting, stamping, pressing or cold forming. Due to its high polymer phosphate content this cleaner can also be used in hard water and also provides temporary rust prevention. Working Temperature is +40 to +80°C. | Request Form |
| BONDERITE S-OT HI-LITE 2495 IDH 593058 | BONDERITE® S-OT HI-LITE 2495 WIP DEFECT HI-LIGHTER are quarter folded non-woven wipes saturated with a low viscosity, petroleum based sheet metal highlighting aid. This product is used to visually aid in locating small surface defects on unpainted metal parts prior to receiving a conversion coating. Industrial cleaners. | Request Form |
| Request Form | ||
| Request Form | ||
| Request Form | ||
| BONDERITE M-NT 1200 R2 JC30 IT IDH 1369746 | BONDERITE M-NT 1200 is a phosphate-free, liquid pre-treatment product for the conversion pre-treatment of galvanized steel, steel and aluminium. The product is free from volatile organic components.The procedure offers a very good adhesive coat for a following coating with paints and an excellent corrosion protection after the paint finish.The BONDERITE M-NT 1200 pretreatment is carried out in a spray process, followed by a DI water rinse (demineralised water). The procedure is compatible with all kinds of paint finish. |
Request Form |
| BONDERITE L-GP F 425 PA18KG AN IDH 2550625 | BONDERITE® L-GP F 425 is a creamy white lubricating dispersion of boron nitride in water with an acrylic emulsion binder. It is most effective at temperatures between +932 °F to +1,832 °F (+500 °C to +1,000 °C). It is a sprayable release agent developed for use in the fabrication of titanium and aluminum/lithium alloy components by the superplastic forming/diffusion bonding process. | Request Form |
| Request Form | ||
| BONDERITE C-NE 5225 JC30KGTR IDH 1414909 | BONDERITE® C-NE 5225 is an aqueous, electrically conductive,neutral cleaner designed for steel,cast iron and silumin work pieces.This product contains phosphates, borates,organic and inorganic corrosion protection components and nonionic cationic surfactants. The product exhibits excellent separation of tramp oils and optimal degreasing power. This product can be applied with spray and is ideal for cleaning and simultaneous passivation after machining, cutting, stamping, forming, etc. | Request Form |
| Request Form | ||
| BONDERITE C-NE 3300 JC23KG WENS+ IDH 2587877 | BONDERITE® C-NE 3300 is an aqueous neutral cleaner specially designed for steel, cast iron and aluminum. It is composed of organic corrosion protection components, active cleaning agents and inhibitors, and is ideal for cleaning after machining, cutting, stamping, forming, and simultaneous passivation of metals. It has high demulsifying properties, is suitable for high pressure applications, and can be applied by spray processes. Due to its long bath-life times, it also has very good sustainability. | Request Form |
| TEROSON WX 183 50 ML EAT IDH 2139793 | Henkel Teroson Wx 183 Ceramic Coating creates a flawless appearance on vehicle surfaces while helping to protect them from external factors. The product forms a protective and glossy layer on the paint, and it can be applied either by a professional or amateur. | Request Form |
| Request Form | ||
| BONDERITE C-AK 359 JC 250KG IDH 925445 | BONDERITE® C-AK 359 is a yellow, liquid spray product, especially formulated for degreasing all types of metals. It has been designed especially for removal of polishing pastes. It has good detergent properties and does not attack aluminum or copper-containing metals. | Request Form |
| BONDERITE L-CA 696 CAN 1KG AN IDH 1238790 | When you are looking for a soft grease designed for painting onto ladles or other surfaces needing protection from attack by molten metals or fluxes, BONDERITE® L-CA 696 is a great choice. It contains refractory pigments and, when immersed in molten metal, produces a dry, aerated insulating coating, which is highly effective in repelling molten metal, prolonging the life of the ladle. You can expect easy application and repair, strong insulating properties for reducing thermal fatigue, and a formulation to minimize hazards during application and use. | Request Form |
| Request Form | ||
| BONDERITE S-FN 6748 IDH 27997 | BONDERITE® S-FN 6748 is an aqueous, oil-free, industrial cleaner designed as a temporary corrosion protection agent used in spray and immersion processes from +59 °F (+15 °C). It is composed of organic corrosion protection components and stabilizers against water hardness precipitation and is used to passivate steel and cast iron for subsequent storage in closed warehouses. | Request Form |
| BONDERITE M-AC AL2000 JC23KG IDH 2844058 | Liquid-based conditioner with enhanced shelf life and bath life which creates greater process efficiency. |
Request Form |
| BONDERITE M-FE 1070 DR30KG TR IDH 2387961 | BONDERITE® M-FE 1070 is specially formulated to produce a uniform, non-metallic phosphate coating. It provides a clean, soil-free surface, inhibiting corrosion and increasing the adhesion and durability of paint finishes. It also creates a non-conducting bond between the base metal and the paint. | Request Form |
| BONDERITE S-MA 98 JC23 WENS IDH 2582344 | BONDERITE® S-MA 98 is a colorless, homogenous, water-based, ready-to-use, anti-weld splatter agent which is applied prior to welding which reduces the deposit of weld splatter on unpainted metal surfaces of vehicles. It is easily removed in the alkaline cleaning stage of conversion coating lines or, if desired, can be removed with water washing. | Request Form |
| BONDERITE L-GP 39SY20 235 PENT PA27KG IDH 595282 | BONDERITE® L-GP 39SY20 (235 PENT GEAR MARKING COMPOUND) is a heavily pigmented lubricant used for checking the alignment of matched gear sets in the automotive industry. As the gears are turned, a distinct pattern is set on the gears highlighting any problem areas. | Request Form |
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| BONDERITE M-NT 4830 JC30KG RWE IDH 28650 | BONDERITE® M-NT 4830/4831 is a 2-part, chrome-free passivator for aluminum and its alloys. Solved in water water the components produce colorless conversion layers that provide corrosion resistance and very good adhesion properties for subsequent painting. Product is suitable for spray or dip application. Highly cost-effective method through low investment/running costs and short processing times. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| BONDERITE M-NT 40042 JC30KG IDH 1433931 | BONDERITE® M-NT 40042 is a zirconium technology based, surface treatment liquid product for a conversion treatment of ferrous material, aluminum, zinc and alloys. It produces conversion layers which provide excellent corrosion resistance and is an excellent anchorage base for liquid, powdered or electrophoretic paints. | Request Form |
| Request Form | ||
| BONDERITE C-AK C 72 25KGTR IDH 164279 | BONDERITE C-AK C 72 is a powdered, non silicated, strongly alkaline cleaner for use in continuous strip lines. It is preferably used in spray application.BONDERITE C-AK C 72 is effective on most metals and especially suitable on cold roll steel coil stock, galvanized steel and aluminium. | Request Form |
| BONDERITE C-AD 1561 JC30KG IDH 1289713 | BONDERITE® C-AD 1561 (RIDOSOL 1561) is a metal pre-treatment industrial cleaner liquid booster based on non-ionic surfactants. It is used in spray and spray/immersion processes and must be combined with a suitable cleaner. | Request Form |
| BONDERITE C-NE 5064 DR205KGWENS IDH 2012201 | BONDERITE® C-NE 5064 is an aqueous, solvent-free, sprayable, neutral cleaner designed for steel and cast iron. It contains organic corrosion-protection components and stabilizers against water hardness precipitation, and is an excellent emulsifier with non-ionic surfactants. All this makes it ideal for cleaning and simultaneous passivation after cutting or stamping. It has a working temperature of 50°C to 80°C (122°F to 176°F) and a 0.5-to-3-minute operating time. | Request Form |
| Request Form | ||
| BONDERITE C-AK 18 BG25KG TR IDH 164032 | BONDERITE C-AK 18 is cleaning and degreasing of aluminium parts in an immersion porcess. No problems concerning further treatment of the pieces. |
Request Form |
| Request Form | ||
| BONDERITE M-NT 1 JC30KG TR IDH 1405621 | To treat and prepare steel, zinc and aluminum parts before your painting project, try BONDERITE® M-NT NT-1. This phosphate-free reactive conversion coating contains no regulated heavy metals or organic ingredients and can be applied by spray and immersion. When applied, it will form a film that increases the adhesion and corrosion resistance of painted metal surfaces.
|
Request Form |
| BONDERITE L-GP D31A AE400ML IDH 1238998 | BONDERITE® L-GP D31A is a graphite-based aerosol lubricant. Based on pure and low-friction lamellar graphite, the product provides heat-resistant and lubricating coatings at temperatures up to +1832 °F (+1000 °C) and beyond. BONDERITE L-GP D31A polymerizes at ambient temperature, and has a good covering power of about 75ft² (7m²) per spray can. Ideal for use in glassworks and foundries. | Request Form |
| BONDERITE C-NE N JC 23KG WENS IDH 2277764 | BONDERITE® C-NE N is a conductive, neutral, rust and scale remover specially designed for a wide variety of materials, including ferrous and non-ferrous metals. Perfect for removing residues resulting from deburring processes or laser cutting, it can be applied with both spray and immersion processes, and is also suitable for pretreatment. | Request Form |
| Request Form | ||
| BONDERITE M-FE 3962 60KG TR IDH 164197 |
BONDERITE M-FE 3962 is a liquid product based on acidic phosphates and a combination of highly efficient surfactants. BONDERITE M-FE 3962 degreases and cleans steel, galvanized steel and aluminium.On cold rolled steel and iron BONDERITE M-FE 3962 simultaneously generates a uniform iron phosphate layer with a coating weight of 0.2 g/m2 - 0.4 g/m2.The iron phosphate layer provides an excellent adhesion for organic coatings and improves the corrosion resistance.Also on galvanized steel and aluminium surfaces the adhesion of organic coatings is improved by BONDERITE M-FE 3962 .When parts out of aluminium or galvanized steel are treated in the same line at a high amount (>10% ), BONDERITE M-AD 338 should be added to avoid a distortion of the iron phosphating process.BONDERITE M-FE 3962 is used in spray applications. BONDERITE can also be used in high pressure equipment. |
Request Form |
| Request Form | ||
| BONDERITE M-AD 700 JC30KGTR IDH 1281966 | BONDERITE® M-AD 700 is a clear liquid, slightly alkaline product of inorganic salt and water to increase the pH-value in conversion coating baths. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters.
|
Request Form |
| BONDERITE M-FE 1070B 30KG IDH1992964 | BONDERITE® M-FE 1070 is specially formulated to produce a uniform, non-metallic phosphate coating. It provides a clean, soil-free surface, inhibiting corrosion and increasing the adhesion and durability of paint finishes. It also creates a non-conducting bond between the base metal and the paint. | Request Form |
| Request Form | ||
| BONDERITE C-NE 10330 JC25KG IDH 2090351 | BONDERITE C-NE 10330 is an aqueous neutral cleaner. It is composed of organic corrosion protection components, cleaning active agents and inhibitors. Change of colour is caused by raw material and has no Impact on performance. |
Request Form |
| BONDERITE C-AK 7163 CF/3AR 30KG IDH 2387952 | BONDERITE® C-AK 7163 CF/3 is a colorless to slightly yellow, transparent alkaline, metal pre-treatment industrial cleaner liquid that is able to degrease steel, zinc coated substrates and aluminum in dip and spray processes. It contains phosphates but it is silicate-free. It must be combined with a suitable cleaning booster. | Request Form |
| BONDERITE C-NE 10300 JC25 IDH 2012208 | BONDERITE C-NE 10300 is an aqueous neutral cleaner. It is composed of organic corrosion protection components, cleaning active agents and inhibitors. Change of colour is caused by raw material and has no Impact on performance. |
Request Form |
| BONDERITE M-NT 1455-W WIPES CS300EA IDH 593067 | BONDERITE® M-NT 1455 W WIPES is a dry-in-place, chromium-free conversion coating compatible with a variety of metals, such as aluminum, zinc, zinc alloy, cold and hot-rolled steel, stainless steel, galvanized, sand-basted and armor plate surfaces. BONDERITE M-NT 1455 W WIPES offers easy wipe-on application and is particularly ideal for large surface areas, removing the need for time-consuming wash and etch priming. When applied, it leaves the substrate with an excellent base for organic finishes, paint, sealers, and most adhesives, but it also ensures corrosion resistance for subsequently applied paints. | Request Form |
| BONDERITE M-NT 400 IDH 2579131 | BONDERITE® M-NT 400 is a chrome-free liquid product for a conversion treatment of light metals as well as post passivation for phosphate layers. This product is compatible with steel, zinc and aluminum and can be applied by both spray and immersion. | Request Form |
| BONDERITE M-NT 5992 IDH 2587601 | BONDERITE® M-NT 5992 (ALODINE 5992) is a trivalent chromium-based aluminum conversion surface treatment capable of producing a hexavalent, chrome-free conversion layer on aluminum and its alloys changing the color to light green. This improves paint adhesion and increases anti-corrosive protection. In bare metal finishing, it also provides low electrical contact resistance. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| BONDERITE M-NT 4850-2 JC30KG IDH 429614 | BONDERITE® M-NT 4850-2 is a liquid spray/dip concentrate that produces a chrome-free, colourless conversion treatment on light metals. It can also be used as a chromium free post-passivation on phosphated surfaces. Both treatments provide excellent corrosion resistance and excellent adhesion properties for subsequent painting.Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| Request Form | ||
| BONDERITE O-AD 35 ACTIVATOR DR30KG IDH1967870 |
BONDERITE O-AD 35 ACTIVATOR is an acid additive for use with various autodeposition baths. |
Request Form |
| BONDERITE M-AD 24 OX JC30KG IDH 74614 |
BONDERITE® M-AD 24 OX is an oxidizer additive used with various autodeposition baths. |
Request Form |
| BONDERITE M-NT 1455T JC32KGRWE IDH 675048 | BONDERITE® M-NT 1455T is a dry-in-place, chromium-free, conversion coating treatment for aluminum, zinc, zinc alloy and cold rolled steel surfaces for continuous strip lines. It produces a uniform coating which improves adhesion, inhibits corrosion and increases the durability of paint finishes. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| BONDERITE S-ST 1303 RN 1 JC30 IDH 428806 | BONDERITE® M-NT 1303™ NON-CHROME TREATMENT chemicals are formulated for sheet or strip line conversion coating of hot-dip galvanized or electro-galvanized metal. The process transforms the metal surface into a non-metallic, amorphous, complex oxide coating; this coating provides a clean, grease-free surface and a corrosion-inhibiting bond between the base metal and the surface, preventing corrosion and enhancing the adhesion and durability of laminates and paint coatings. | Request Form |
| BONDERITE S-MA 98 JC25KG ES IDH 776125 | BONDERITE® S-MA 98 is a colorless, homogenous, water-based, ready-to-use, anti-weld splatter agent which is applied prior to welding which reduces the deposit of weld splatter on unpainted metal surfaces of vehicles. It is easily removed in the alkaline cleaning stage of conversion coating lines or, if desired, can be removed with water washing. | Request Form |
| BONDERITE S-FN 7400 30 KG IDH 2209997 |
BONDERITE S-FN 7400 is an aqueous temporary corrosion protective based on organic components. Change of colour is caused by raw material and has no impact on performance. |
Request Form |
| Request Form | ||
| Request Form | ||
| BONDERITE M-AD 3080 SA25TR IDH 1407375 | BONDERITE® M-AD 3080 is a crystalline additive solid for conversion coating applications in metal pre-treatment plants. The product is used as a reducing additive in ironside zinc phosphate processes before cold forming operations on steel materials. BONDERITE M-AD 3080 avoids the reduction of NO3 and NO2 inside zinc phosphate baths working at high temperatures and with high free-acidity values. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| Request Form | ||
| Request Form | ||
| BONDERITE C-NE 400 JC30KG TR IDH 1415262 | BONDERITE® C-NE 400 is an aqueous, neutral cleaner specially designed for steel, cast iron, and aluminum cleaning applications. Specially formulated for complex part designs with multiple subtrates, including plastics, it has excellent corrosion protection and demulsifying properties. It is composed of organic corrosion-protection components, cleaning active agents, inhibitors and stabilizers, and is ideal for cleaning after machining, cutting, stamping, forming, and simultaneous passivation. It can be used in spray processes and is suitable for high pressure operations. Operating temperature is 10°C to 80°C (50°F to 176°F). | Request Form |
| BONDERITE C-NE 5026 DR55KG TR IDH 164051 | BONDERITE® C-NE 5026 is clear, light yellowish, liquid neutral cleaner which is used in spray processes for cleaning after cutting, stamping or pressing, simultaneously passivating steel and cast iron. It is composed of organic corrosion protection components, non-ionic surfactants, cationic surfactants and biocides. A change of color is caused by raw material which has no impact on performance. | Request Form |
| BONDERITE M-ZN 20 IDH 1957958 | BONDERITE® M-ZN 20 (GRANODINE 20) is a nitrate, nitrite-accelerated phosphating metal pre-treatment which produces micro-crystalline zinc calcium phosphate layers on steel and iron surfaces. This provides very good corrosion protection and excellent adhesion for painting or coating. It is low in sludge and an exceptionally easy-care process. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| BONDERITE M-MN 117 M-1 JC35TR IDH 164238 | BONDERITE® M-MN 117 is a functional coating and pre-treatment for phosphating applications. Producing black manganese phosphate layers on iron and steel, the product reduces frictional resistance and shortens the running-in period of machine parts. Combined with anti-corrosion oils and waxes, the phosphate layers provide excellent corrosion protection. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| BONDERITE L-GP D 85 TER A | BONDERITE L-GP D 85 TER A AERO is a high temperature and wear resistant coating. |
Request Form |
| BONDERITE C-AK 359 KC25KG IDH 440507 | BONDERITE® C-AK 359 is a yellow, liquid spray product, especially formulated for degreasing all types of metals. It has been designed especially for removal of polishing pastes. It has good detergent properties and does not attack aluminum or copper-containing metals. | Request Form |
| Request Form | ||
| Request Form | ||
| BONDERITE L-GP T 144 CU25KG AN IDH 1395518 | BONDERITE® L-GP T 144 ACHESON (DAG T 144) is a water-based, graphite lubricant used for applying an electrically conductive coating to the exterior of the plastic sheaths of cables. On high tension cables this coating serves as a test electrode for detecting insulating defects but on telephone cables it serves to avoid electrical interference. It gives a smooth, water-resistant coating. | Request Form |
| Request Form | ||
| BONDERITE C-AK 11010 BG25KG TR IDH 164078 | BONDERITE® C-AK 11010 is a clear white powder cleaner used in spray processes for degreasing of all metals. It is composed of carbonates, phosphates, silicates and non-ionic surfactants. It is used for cleaning after cutting, stamping or pressing of all steel, aluminum and non-ferrous metals. The product does not affect the alloys of aluminum, copper, tin or zinc and may be used to clean different metals simultaneously. It may give a slight dulling to mirror polished aluminum if used over an extended contact time. | Request Form |
| BONDERITE C-AK 7163 CF/3 JC30 TR IDH 1415264 | BONDERITE® C-AK 7163 CF/3 is a colorless to slightly yellow, transparent alkaline, metal pre-treatment industrial cleaner liquid that is able to degrease steel, zinc coated substrates and aluminum in dip and spray processes. It contains phosphates but it is silicate-free. It must be combined with a suitable cleaning booster. | Request Form |
| Request Form | ||
| BONDERITE M-ZN 958 R6 DR75KGTR IDH 164222 | BONDERITE® M-ZN 958 MU is a nitrite accelerated tricationic phosphating metal pre-treatment process for steel, galvanized and alloy coated (Zn/Ni) steel. It generates a fine crystalline coating of manganese and nickel containing zinc phosphate that has very good corrosion protection properties and is an excellent foundation for subsequent painting or organic coating. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters.
|
Request Form |
| BONDERITE M-PT 54NC JC30KGTR IDH 1556028 | BONDERITE® M-PT 54 NC is an acidic, chrome-free liquid chemical used as post-passivation in either immersion or spray final rinse to minimize underfilm corrosion and improve paint adhesion.Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| BONDERITE M-NT 1455T CT1020 WENS IDH 2277090 | BONDERITE® M-NT 1455T is a dry-in-place, chromium-free, conversion coating treatment for aluminum, zinc, zinc alloy and cold rolled steel surfaces for continuous strip lines. It produces a uniform coating which improves adhesion, inhibits corrosion and increases the durability of paint finishes. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| Request Form | ||
| BONDERITE S-PR 6788 JC18KGES IDH 403419 | BONDERITE® S-PR 6788 is a liquid, non-flammable, organic industrial cleaner containing detergent substances, a large proportion of emulsifiers and antioxidant compounds. The emulsifications of this product degrease and remove chips with no risk of corrosion, placing a practically invisible film on the parts, with extreme water-repellant and antioxidant properties. | Request Form |
| BONDERITE M-AD 4977 B JC25 RWE IDH 1257410 | BONDERITE® M-AD 4977 B is a clear-to-yellow, alkaline additive liquid for metal pre-treatment plants. Composed of inorganic salts and water, the product is designed to correct or increase the pH value in PREPALENE® X-baths. BONDERITE M-AD 4977 B has a shelf life of 36 months in unopened packaging and is recommended for storage at temperatures of between 0 °C and +50 °C. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| Request Form | ||
| Request Form | ||
| Request Form | ||
| BONDERITE M-NT 1455T JC20 WNS IDH 2346696 | BONDERITE® M-NT 1455T is a dry-in-place, chromium-free, conversion coating treatment for aluminum, zinc, zinc alloy and cold rolled steel surfaces for continuous strip lines. It produces a uniform coating which improves adhesion, inhibits corrosion and increases the durability of paint finishes. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| BONDERITE C-AD CW 25KG TR IDH 2347942 | BONDERITE® C-AD CW is a liquid metal pre-treatment cleaning booster based on non-ionic surfactants. It is used in spray- and spray/immersion processes and must be combined with a suitable cleaner. | Request Form |
| BONDERITE C-AK RT-1022R 30KG IDH 1904923 | BONDERITE® C-AK RT-1022R is a two package, phosphate-free, alkaline liquid cleaner formulated to prepare ferrous, zinc and aluminum surfaces to receive uniform, dense, crystalline conversion coatings. This product operates at a low temperature and is a medium/heavy duty cleaning solution. It can be applied by spray or immersion and is very effective in removing metal working fluids and soils, especially in the automotive industry. | Request Form |
| BONDERITE C-NE 5026 30KG IDH 2387624 | BONDERITE® C-NE 5026 is clear, light yellowish, liquid neutral cleaner which is used in spray processes for cleaning after cutting, stamping or pressing, simultaneously passivating steel and cast iron. It is composed of organic corrosion protection components, non-ionic surfactants, cationic surfactants and biocides. A change of color is caused by raw material which has no impact on performance. | Request Form |
| BONDERITE L-GP 154 IDH 1238752 | BONDERITE L-GP 154N ACHESON (Known As ACHESON DAG 154N) is a specially processed graphite dry film lubricant that offers clean, long-wearing lubrication without redesign of component dimensions. It requires minimum surface preparation and can be applied to most substrates by using typical spray, brush or dip techniques. BONDERITE L-GP 154N ACHESON air dries rapidly at room temperature. BONDERITE L-GP 154N ACHESON is an exceptionally stable compound of processed micrographite and thermoplastic resin in isopropyl alcohol. | Request Form |
| BONDERITE C-AD RT-1020S 30KG IDH 1908304 | BONDERITE® C-AD RT-1020S is a liquid cleaning booster based on nonionic surfactant and must be combined with a suitable cleaner. This cleaner is mostly used together with liquid cleaner BONDERITE® C-AK 1022R, for spraying or dipping processes. This cleaning booster can be used at room temperature. | Request Form |
| BONDERITE M-AC 50-1 IDH 422396 | BONDERITE® M-AC 50-1 is a metal pre-treatment phosphating product for metals. Applied by immersion and spray processes, this powdered activating product is added to the rinsing bath prior to phosphate treatment. It is effective in facilitating uniform and fine crystalline phosphate coatings on iron, steel, aluminum and zinc surfaces. BONDERITE M-AC 50-1 can also be used in coil lines. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| BONDERITE M-NT 1455T JC23 WENS IDH 2577420 | BONDERITE® M-NT 1455T is a dry-in-place, chromium-free, conversion coating treatment for aluminum, zinc, zinc alloy and cold rolled steel surfaces for continuous strip lines. It produces a uniform coating which improves adhesion, inhibits corrosion and increases the durability of paint finishes. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| BONDERITE C-MC 21130 JC25KG IDH 2012208 | BONDERITE® C-MC 21130 dissolves both aqueous and solvent-containing paints, lacquers, varnishes, latex, rubber, resins, and electrophoretic deposits (EPD). It will even remove adhesives such as cyanoacrylates, silicones, 2-part PU silicones and other bi-component polyurethanes, provided they have not completely dried. It is odourless at application temperatures up to +40°C and biostable. | Request Form |
| Request Form | ||
| Request Form | ||
| Request Form | ||
| BONDERITE M-NT 4850-2 JC23 WENS IDH 2587865 | BONDERITE® M-NT 4850-2 is a liquid spray/dip concentrate that produces a chrome-free, colourless conversion treatment on light metals. It can also be used as a chromium free post-passivation on phosphated surfaces. Both treatments provide excellent corrosion resistance and excellent adhesion properties for subsequent painting.Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| BONDERITE C-AK 6706 JC23KG WNS IDH 2587453 | BONDERITE® C-AK 6706 (known as NOVASPRAY 6706) is white to yellowish, silicate-free, mild alkaline, powerful liquid industrial cleaner based on borates, caustic potash, salts of organic acids and non-ionic surfactants. It is used for cleaning and degreasing iron, steel, colored metals and zinc coated material in spray processing. It can be used in ultra filtration without any problems. | Request Form |
| BONDERITE S-PD 951 25KG IDH 29221 | BONDERITE® S-PD 951 is a white, organic polymer emulsion paint coagulant which allows a good separation of solids from the circulating water and a high solid content in the discharged paint sludge. It can be used for flotation support or as a de-watering agent (e.g. decanter). | Request Form |
| BONDERITE M-NT 2040 1290KG IDH 28375 | BONDERITE® M-NT 2040 is a conversion coating etch passivation for aluminum surfaces. This chromium-free product stabilizes the electrical resistance of surfaces to improve adhesive bonding. Applied in concentrations of 1-3%, depending on the application, it can be used in an immersion and spray process. | Request Form |
| BONDERITE C-AK C 72 25KGTR IDH 251061 | BONDERITE® C-AK 72 is a white powdered industrial cleaner used in the manufacturing industry as a universal cleaning agent for the treatment of steel, aluminum and non-ferrous metals after cutting, stamping and pressing has occurred. It has no effect on the alloys of aluminum, copper, tin or zinc and may be used to clean different metals simultaneously. | Request Form |
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| BONDERITE C-IC 4902 JC30 IDH 1788424 | BONDERITE® C-IC 4902 is an acid cleaner which removes oxides and alkali residues of former alkaline degreasing or etching processes on aluminium and its alloys. It is used in an immersion and spray process. | Request Form |
| BONDERITE M-PP 866 R GR250KG IDH 617099 | BONDERITE® M-PP 866 R is a flexible PVDC coating that protects against corrosion. It is water-based, dip-applied and provides outstanding barrier properties and high impact resistance. Low temperature curing makes this a highly economical process which delivers a uniform coating thickness without the Faraday cage effect. The resultant layer can be top-coated with liquid paints. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| BONDERITE M-CR 1430 C IDH 1152615 | BONDERITE® M-CR 1430C™ TRI CHROME TREATMENT is formulated for dry-in-place stripline application to aluminum. Application is generally with reverse roll coating. The single-package treatment produces a uniform, nonmetallic coating which improves adhesion, inhibits corrosion and increases the durability of paint and lacquer finishes. | Request Form |
| BONDERITE C-AK 2260 TR 30KG IDH 2142548 | BONDERITE C-AK 2260 IT is a liquid, alkaline, multifunctional cleaner for metal surfaces. In combination with specific additives, BONDERITE C-AK 2260 IT can be used for many industrial applications : Dephosphating (dip and spray),Electrolytic cleaning, Chemical cleaning (dip and spray), Alkaline paint-stripping (dip and spray), Descaling (dip and spray). | Request Form |
| Request Form | ||
| BONDERITE M-AD 229 JC38KG IDH 1172269 | BONDERITE® M-AD 229 is a blue, low-acidic additive for all kinds of metal pre-treatment processes. The product serves to adjust copper concentration within pre-treatment plants in combination with BONDERITE products. BONDERITE M-AD 229 has a shelf life of 36 months in unopened packaging and is recommended for storage at temperatures of between 0 °C and +50 °C. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| Request Form | ||
| BONDERITE M-AD MN-4 JC25KGTR IDH 164297 | BONDERITE® M-AD MN-4 is a whitish-to-light-brown, alkaline additive powder for metal pre-treatment applications. The product increases the manganese content in phosphate baths, and decreases 'free acid'. BONDERITE M-AD MN-4 is composed of inorganic salts and has an unopened shelf life (in original packaging) of 36 months. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| Request Form | ||
| Request Form | ||
| BONDERITE C-NE 6765 IDH 347159 | BONDERITE® C-NE 6765 is a cutting fluid for general machining of aluminum, steel, and cast iron in a variety of water hardness conditions. It’s also great as a cleaner/corrosion protecting emulsion in a washer system, and provides medium term indoor corrosion protection of steel and cast iron. Can be used in both spray and immersion processes. | Request Form |
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| BONDERITE M-AD 131 JC30KG TR IDH 1476224 | BONDERITE® M-AD 131 is a colorless to slightly yellow liquid accelerator used to increase accelerator (nitrite) levels, in zinc phosphate baths. It is applied by means of spray or immersion processes. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters.
|
Request Form |
| BONDERITE S-PR P-21 JC30KG TR IDH 1415266 | It is a passivation product used in dipping and spraying systems to protect iron and steel parts from rust. It can be used in leak testing in the metal and automotive industries. | Request Form |
| BONDERITE S-OT 310B JC4KGENT AN IDH 1962070 | BONDERITE® S-OT 310B is a PTFE dry film lubricant dispersion in solvent/water formulated for a variety of industrial and consumer applications. It is a two-package product which should be combined with BONDERITE L-GP T A COMP. Once mixed, it forms a dispersion of fluorocarbon in a thermoset binder designed to be spray applied. It produces a low friction coating without stick-slip characteristics. To view Technical Information for these products, please go to the pages for BONDERITE S-OT 310B and BONDERITE L-GP T A COMP. | Request Form |
| BONDERITE C-NE 5177 30KG IDH 2159799 | BONDERITE C-NE 5177 is a liquid, mild alkaline cleaner concentrate field proven for cost effective cleaning of precision parts. Bonderite C-NE 5177 also contains corrosion inhibitors which provide in-process rust protection on ferrous and nonferrous alloys. Its’ unique composition of alkalinity, corrosion inhibitors and detergents provides a robust cleaning solution for today’s inprocess cleaning needs. | Request Form |
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| BONDERITE M-NT 1800 R-31 TR IDH 2208092 | BONDERITE® M-NT 1800 MU A is a zirconium-technology based pretreatment liquid for the conversion pretreatment of galvanized steel, steel, and aluminum. It’s free of volatile organic components, promotes paint adhesion, and increases corrosion resistance. It is compatible with all types of paint and can be applied by spray. | Request Form |
| BONDERITE M-AD 338 JC23KG RWE IDH 2561795 | BONDERITE® M-AD 338 (TONER 338) is a clear, metal pre-treatment liquid additive, composed of inorganic salt and water, for zinc phosphating baths. It is designed to increase the fluoride content in zinc phosphate baths. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| BONDERITE M-AD 101 | BONDERITE® M-AD 101 (known as TECTALIS ADDITIVE 101) is a light yellowish, acidic, liquid metal pre-treatment additive composed of inorganic salt and water which is used to add aluminum to BONDERITE baths and to complex fluoride. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| Request Form | ||
| BONDERITE C-AK 7163 CF/5 1250KG IDH 164304 | BONDERITE® C-AK 7163 CF/5 is a liquid, alkaline industrial metal pre-treatment cleaner for steel, zinc and aluminum. It is used in spray and immersion processes and must be combined with a suitable cleaning booster. | Request Form |
| Request Form | ||
| Request Form | ||
| BONDERITE M-AD 565 TR 30KG IDH 2252128 | BONDERITE® M-AD 565 is a clear, alkaline, metal pre-treatment liquid additive which can be used to reduce the free acid in zinc phosphating baths or to increase the pH in iron phosphating processes. It can be used in immersion or spray processes. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| Request Form | ||
| Request Form | ||
| Request Form | ||
| Request Form | ||
| BONDERITE M-AD 101 JC25 WS IDH 1452318 | BONDERITE® M-AD 101 (known as TECTALIS ADDITIVE 101) is a light yellowish, acidic, liquid metal pre-treatment additive composed of inorganic salt and water which is used to add aluminum to BONDERITE baths and to complex fluoride. Please note: BONDERITE M products are used in the surface modification of metals and usually applied in a multi-stage process. The performance of these surface treatments depends on various factors such as the preceding cleaning or etching steps (BONDERITE C portfolio), line design or process parameters. | Request Form |
| Request Form | ||
| Request Form | ||
| Request Form | ||
| BONDERITE M-ZN 952 RX-A 30KG IDH 2387963 | BONDERITE® M-ZN 952 generates a fine crystalline coating of manganese and nickel containing zinc phosphate. The crystalline layer has very good corrosion protection properties and is an excellent foundation for subsequent painting or organic coating. The coating weight is typically 1.8 to 2.8 g/cm² .It is particularly suited for pretreatment for electrocoat application and for control with Automatic Control Equipment. | Request Form |
| Request Form | ||
| Request Form | ||
| BONDERITE C-AK 1563 A CT1270RWE IDH 631829 | BONDERITE® C-AK 1563 is an alkaline polyacrylate and phosphate based liquid cleaner designed for steel, galvanized steel and aluminum. Ideal for metal pre-treatment processes, it can be applied by both spray and immersion processes. Its operating temperature is 50ºC to 80ºC (122ºF to 176ºF). | Request Form |
| BONDERITE C-AK 1563-1 CT1360KG IDH 632429 | BONDERITE® C-AK 1563 is an alkaline polyacrylate and phosphate based liquid cleaner designed for steel, galvanized steel and aluminum. Ideal for metal pre-treatment processes, it can be applied by both spray and immersion processes. Its operating temperature is 50ºC to 80ºC (122ºF to 176ºF). | Request Form |
| BONDERITE S-FN 6750 JC23KG RWE IDH 2587295 | BONDERITE® S-FN 6750 (P3-PREVOX 6750) is an aqueous, temporary corrosion protection industrial cleaner used in spray and immersion processes. It is composed of organic and inorganic corrosion protection ingredients and is used for the passivation of steel and cast iron for storage. It is used in immersion and spray systems, especially in the last stage of multiple zone systems. | Request Form |
| Request Form | ||
| Request Form |